photovoltaics Equipment in Sierra Leone

Serving Sierra Leone | Office in Sierra LeoneNear Sierra Leone
787 Results found
  • Keyword: photovoltaics ×

  • Location: Africa ×

  • Location: Sierra Leone ×

Model Photovoltaic Solar Panel - Photovoltaic Energy Systems (PV)

by Baymak     based in İSTANBUL, TURKEY

IEC 61215/61730-1/61730-2. TS EN ISO 9001. TS EN ISO 14001. TS ISG OHSAS 18001. TSE HYB 12690

TROSIFOL - Model R40 - Solar PVB Films

by Kuraray Europe GmbH - Division Trosifol     based in Troisdorf, GERMANY

TROSIFOL SOLAR R40 and all other TROSIFOL SOLAR PVB films are distinguished by their outstanding visual properties. For decades now, PVB has been the preferred plastic for safety glazing. These properties, combined with proven high long-term stability in outdoor applications even in non-edge-protected glazing, assure module manufacturers of the ...

TROSIFOL - Model R40 - Ultra White PVB Films

by Kuraray Europe GmbH - Division Trosifol     based in Troisdorf, GERMANY

TROSIFOL R40 ULTRA WHITE is a multifunctional product. This PVB film provides outstanding encapsulation of the module and its pronounced whiteness strongly reflects the light over a broad wavelength range. This significantly improves module efficiency and increases energy yield.

TROSIFOL - Model SOLAR UV+ - PVB Encapsulation Film

by Kuraray Europe GmbH - Division Trosifol     based in Troisdorf, GERMANY

TROSIFOL SOLAR UV+ is a ground-breaking PVB encapsulation film with a modified formulation. This highly transparent film with outstanding UV transmittance increases the energy yield of crystalline UV-selective solar cells and CIS/CIGS thin-layer solar modules still further. The film shows excellent resistance to heat, UV radiation and other ...

TROSIFOL - Model R100 - Solar PVB Films

by Kuraray Europe GmbH - Division Trosifol     based in Troisdorf, GERMANY

If TROSIFOL SOLAR PVB films are to be used in a conventional module type or in a module type with a new cell technology, TROSIFOL's Technical Service should be contacted.For the crystalline solar cells most frequently produced and processed internationally, PVB films SOLAR R40 and R100 transparent are used, and exclusively in glass/glass PV ...

Model Bm 860 - Brick Master

by Meyer Burger Technology Group     based in Columbia, NEW JERSEY (USA)

HE NEXT GENERATION IN SQUARING The BM 860 belongs to the newest generation of Bricking machines. It can handle G6 (1000 x 1000 mm) as well as 6” and 8” mono c-Si. The maximum work piece height has been increased up to 550 mm. The use of diamond wire enhances the output by up to 100% compared to slurry-based bricking. The G6 format ...

CR 100 / 110

by Meyer Burger Technology Group     based in Columbia, NEW JERSEY (USA)

VERSATILE, MULTI-USE CROPPING EQUIPMENT - The CR 100/110 single-yoke cropping saw is designed to process single crystals up to 3.2m in length and silicon u-rods with a total span of up to 450mm. Designed for use with diamond wire, the MBT Systems Ltd cropping saws results in low kerf loss and reduced cost of ownership per cut. The saw has a ...

CR 211

by Meyer Burger Technology Group     based in Columbia, NEW JERSEY (USA)

CUSTOMIZABLE CROPPING FOR 300 MM SILICON - The world’s most advanced cropping saw for 300mm silicon. The CR 211 multi-yoke cropping saw offers a flexible cutting system designed to use up to six 6 independently adjustable yokes allowing customized cuts and greater control. Yokes can be configured to provide a single pass cut, or single pass ...

CR 360

by Meyer Burger Technology Group     based in Columbia, NEW JERSEY (USA)

FULLY AUTOMATED WITH AN ADVANCED MATERIAL HANDLING SYSTEM - The CR 360 is a fully automated, 6-yoke cropping saw designed with an automated material handling system that operates in conjunction with a robotic material handling system which mitigates human interaction with the saw. The CR211 accommodates silicon crystals up to 210mm in diameter and ...

Jonas & Redmann - Model WIS - Wafer Inspection System

by Jonas & Redmann Group GmbH     based in Berlin, GERMANY

The term wafer is used to describe a sawn silicon panel, which forms the base component in the manufacture of a solar cell. The quality of the wafer is crucial for the effectiveness of the future solar cell; damaged and faulty wafers must be picked out. Jonas & Redmann designs, develops and manufactures systems for quality control and ...

Need help finding the right suppliers?

Let the XPRTs do the work for you