positive displacement blowers Equipment in North Korea

Served | Office inNear
89 Results found
  • Keyword: positive displacement blowers ×

  • Location: Asia & Middle East ×

  • Location: North Korea ×

Aerzen - Bulk Vehicle Blowers

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

AERZEN Bulk Vehicle Blowers are manufactured in two- and three-lobe design and usable for conveying of air. Intake volume flow approx. 600 up to 2.250 m³/h.

Exhausters With Pre-Inlet

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

For pre-inlet cooling the housing is equipped with an additional third socket on the suction side. The lube oil supply is effected by splash oil lubrication. The conveying chamber is sealed by a sealing system. Driving shaft by double radial seal rings with grease barrier. Direction of flow vertically from top to bottom. The drive can be effected ...

Model Series GR - Process Gas Blowers

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The Process Gas Blower series GR is usable for nearly all technical gases and gas mixtures, which may also be aggressive. Intake volume flow approx. 100 up to 50.000 m³/h.

Model Series GM...DZ - High-Pressure Blowers

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The positive displacement blower series GM...dz is suitable for conveying of air and neutral gases.

Vacuum Blowers With Atex Certification

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

Especially in the chemical industry but also with other applications the ATEX requirements increase steadily. Many manufacturers interpret the ATEX guidelines in such a way that machines which are used in a pressure range of below 800 mbar are not subject to the certification. However, this is only partly correct, as the harmonized standard ...

Vacuum Blowers With Pre-Inlet Cooling

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

For pre-inlet cooling the housing is equipped with an additional third socket on the suction side. The lube oil supply is effected by splash oil lubrication. The conveying chamber is sealed vacuum-tightly by a sealing system. The driving shaft is sealed by double radial seal rings with grease barrier. Direction of flow vertical from top to bottom. ...

Model Series CM - Vacuum Blowers With Canned Drive

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The new AERZEN blowers with canned drive are designed for the conveyance of air and neutral gases and are especially applied in the industrial high-vacuum technology. The blowers cover with a total of 14 sizes theoretical intake volume flows from 105 m³/h to 15.330 m³/h and pressure ranges up to 10-5 mbar abs.

Model Series GM - Positive Displacement Blower

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The positive displacement blower type GM is suitable for oil-free conveying of air and neutral gases. Intake volume flow approx. 30 to 65.000 m³/h.

Model Series HM - Vacuum Blower With Hermetically Sealed Drive

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

Based on the successful canned motor blowers (CM) for aggressive gases in solar-, flat panel- and semiconductor industry Aerzener Maschinenfabrik extended the range of products by the series HM for the application of neutral gases. The new drives are designed water-cooled and hermetically sealed. Due to the reduction of the eddy current losses the ...

Model Series GQ - Process Gas Blowers

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The process gas blowers series GQ is usable for nearly all technical gases and gas mixtures in all industrial ranges. Intake volume flow approx. 1.500 up to 100.000 m3/h.

Related Terms for positive displacement blowers

Need help finding the right suppliers?

Let the XPRTs do the work for you