positive displacement blowers Equipment in Washington

Served | Office inNear
116 Results found
  • Keyword: positive displacement blowers ×

  • Location: USA ×

  • Location: Washington ×

Model D807 & D907 - Positive Displacement Lobe Blowers

by Gardner Denver, Inc.     based in Quincy, ILLINOIS (USA)

Drum high flow, oil-free, contactless, lobe-type blower for use in the dry bulk markets. The machine provides a wide and high range of flows for loading and discharging dry bulk products from tank-trucks including powders, cereal grains and fodder at continuous pressures of up to 1.2 bar g (18psig).D807-Maximum flow: 1,700m³/hr (1000 cfm)at ...

Delta Blower - Model 5 - Blower Units Generation

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The Delta Blower Generation 5 is the synthesis of the successful characteristics developed in previous generations combined with new technical innovations that already meet the market requirements of the future.

DELTA BLOWER - Blower Units

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The positive displacement blower units DELTA BLOWER are usable for oil-free conveying of air and neutral gases. Intake volume flow approx. 30 to 15.000 m³/h.

DELTA BLOWER - Blower Units for Landfill Gas and Biogas

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The positive displacement blower units DELTA BLOWER have been modified specially for applications in the range of landfill- and biogas as well as also natural - or town gas. Intake volume flow approx. 60 up to 2.500 m³/h.

Aerzen - Bulk Vehicle Blowers

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

AERZEN Bulk Vehicle Blowers are manufactured in two- and three-lobe design and usable for conveying of air. Intake volume flow approx. 600 up to 2.250 m³/h.

Exhausters With Pre-Inlet

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

For pre-inlet cooling the housing is equipped with an additional third socket on the suction side. The lube oil supply is effected by splash oil lubrication. The conveying chamber is sealed by a sealing system. Driving shaft by double radial seal rings with grease barrier. Direction of flow vertically from top to bottom. The drive can be effected ...

Model Series GR - Process Gas Blowers

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The Process Gas Blower series GR is usable for nearly all technical gases and gas mixtures, which may also be aggressive. Intake volume flow approx. 100 up to 50.000 m³/h.

Model Series GM...DZ - High-Pressure Blowers

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The positive displacement blower series GM...dz is suitable for conveying of air and neutral gases.

Model Series GQ - Process Gas Blowers

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The process gas blowers series GQ is usable for nearly all technical gases and gas mixtures in all industrial ranges. Intake volume flow approx. 1.500 up to 100.000 m3/h.

Vacuum Blowers With Atex Certification

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

Especially in the chemical industry but also with other applications the ATEX requirements increase steadily. Many manufacturers interpret the ATEX guidelines in such a way that machines which are used in a pressure range of below 800 mbar are not subject to the certification. However, this is only partly correct, as the harmonized standard ...

Related Terms for positive displacement blowers

Need help finding the right suppliers?

Let the XPRTs do the work for you