recuperative thermal oxidizers Equipment in Luxembourg

Served | Office inNear
56 Results found
  • Keyword: recuperative thermal oxidizers ×

  • Location: Europe ×

  • Location: Luxembourg ×

Recuperative Oxidisers

by BABCOCK WANSON - CNIM Group     based in Chevilly-Larue Cedex, FRANCE

Recuperative oxidisers are targeted at industrial process where there is a combination of energy demand and effluent oxidation. These types of thermal oxidisers are mainly suitable for high VOC concentrations and lower flow rates. The process plant includes: An inverter driven effluent transfer fan, A pre-heater for the VOC or odour laden air, The ...

Recuperative Thermal Oxiaiser

by Envirocombustion Systems Limited     based in Congleton, UNITED KINGDOM

Where the concentration of the VOC is relatively high, support fuel use will be low. The heat contained within the clean exhaust gases can be used to preheat the incoming waste gasses prior to the oxidiser furnace. This will further reduce the support fuel use. Additionally a secondary heat exchanger can also be used to recover still further an ...

Process Combustion - Recuperative Thermal Oxidisers

by Process Combustion Ltd     based in Harrogate, UNITED KINGDOM

Process Combustion Ltd.’s range of recuperative oxidisers can be designed with a very high destruction efficiency capability combined with integral heat recovery systems to help reduce operational cost. Systems are supplied with a primary heat exchanger to heat the incoming air stream. Additional secondary heat recovery systems can be ...

Catalytic Recuperative Systems

by Envirocombustion Systems Limited     based in Congleton, UNITED KINGDOM

Volatile Organic Compounds (VOCs) can be converted to carbon dioxide and water with a thermal oxidation reaction, operating typically above 750°C. Using catalytic recuperative or regenerative oxidiser this same reaction can be achieved at much lower temperatures in the presence of a catalyst. The resulting advantage over thermal oxidation is ...

Anguil - Model Catox - Catalytic Recuperative Oxidizer

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

The Anguil Catalytic Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions that are often discharged from industrial processes.  The air pollution control device achieves emission destruction at significantly lower temperatures than thermal oxidation through the use of ...

Anguil - Rotor Concentrator with Recuperative Oxidizer

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Typical air pollution control projects focus on the capture mechanism and a destruction device. With regulations driving towards higher capture efficiencies, combustion devices must treat larger volumes of air with lower concentration of pollutants. The Anguil concentrator is an adsorption system designed to concentrate large volume, low ...

Anguil - Model TRO - Thermal Recuperative Oxidizer

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

The Anguil Thermal Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions that are often discharged from various industrial processes. The air pollution control device uses the proper mix of temperature, residence time, turbulence and oxygen to achieve destruction or thermal ...

Thermal Oxidisers

by Environmental Integrated Solutions     based in Halesowen, UNITED KINGDOM

Thermal oxidisers use high temperature to convert contaminants to carbon dioxide and water vapour. Normally the reaction takes place at a temperature ranging from 750oC to 850oC. At these temperatures, with good mixing and sufficient oxygen, the destruction efficiency in the combustion chamber is almost 100%.

Recuperative Thermal Oxidizers (RTO)

by AEREON     based in Austin, TEXAS (USA)

Recuperative Thermal Oxidizers are complex incineration systems that employ exchangers, boilers, or hot oil heaters to recover energy from high temperature flue gases. These systems can utilize a recuperative system to minimize fuel gas consumption, allowing for economical operation. Moreover, this type of equipment is ideal for sensitive areas ...

Recuperative Thermal Oxidizer

by Epcon Industrial Systems, LP     based in The Woodlands, TEXAS (USA)

Epcon is an industry leader in Thermal Oxidizer technology and can design a system to fully integrate a customer's heat Processing Equipment with a Recuperative Thermal Oxidizer. This provides tremendous costs savings with respect to minimizing

Related Terms for recuperative thermal oxidizers

Need help finding the right suppliers?

Let the XPRTs do the work for you