rotary lobe blowers Equipment

63 Results found
  • Keyword: rotary lobe blowers ×

Volumetric Rotary Lobe Blower

by Mion Ventoltermica Depurazioni S.p.A.     based in Maserada sul Piave, ITALY

Volumetric rotary lobe blower designed specifically for blowing air and materials at a long distance (with ratio of 0.3 cubic meters per Kilo ). It enables the material to be conveyed with reduced-diameter pipes without any wear to the machine because only clean air passes through, and this enables energy saving, as  well as no abrasions or ...

Elmo Rietschle - Model R-Series - Rotary Lobe Blowers

by Gardner Denver     based in Quincy, ILLINOIS (USA)

These compact rotary lobe blowers belong to the group of dry running positive displacement pumps. This means that there is no need for oil or grease in the compression chamber. Only gear box and bearings, which are separated from the pumping chamber, are oil lubricated. Two non contacting triple lobed rotary lobe rotors rotate against ...

Model R-Series - Rotary Lobe Blowers: rugged and economical

by Gardner Denver Schopfheim GmbH     based in Schopfheim, GERMANY

These compact rotary lobe blowers belong to the group of dry running positive displacement pumps. This means that there is no need for oil or grease in the compression chamber. Only gear box and bearings, which are separated from the pumping chamber, are oil lubricated. Two non contacting triple lobed rotary lobe rotors rotate against each other ...

AERZEN Delta Hybrid - Rotary Lobe Compressor Units

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The unique combined experience from the worlds of rotary lobe blowers and screw compressors is the foundation upon which the new groundbreaking and futureoriented Delta Hybrid technology has been developed – the first series of AERZEN Rotary Lobe Compressors. Delta Hybrid, the groundbreaking Rotary Lobe Compressor, is the result of a synergy ...

DELTA BLOWER - Blower Units

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The positive displacement blower units DELTA BLOWER are usable for oil-free conveying of air and neutral gases. Intake volume flow approx. 30 to 15.000 m³/h.

Delta Blower - Model 5 - Blower Units Generation

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The Delta Blower Generation 5 is the synthesis of the successful characteristics developed in previous generations combined with new technical innovations that already meet the market requirements of the future.

DELTA BLOWER - Blower Units for Landfill Gas and Biogas

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

The positive displacement blower units DELTA BLOWER have been modified specially for applications in the range of landfill- and biogas as well as also natural - or town gas. Intake volume flow approx. 60 up to 2.500 m³/h.


Exhausters With Pre-Inlet

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

For pre-inlet cooling the housing is equipped with an additional third socket on the suction side. The lube oil supply is effected by splash oil lubrication. The conveying chamber is sealed by a sealing system. Driving shaft by double radial seal rings with grease barrier. Direction of flow vertically from top to bottom. The drive can be effected ...

Aerzen - Bulk Vehicle Blowers

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

AERZEN Bulk Vehicle Blowers are manufactured in two- and three-lobe design and usable for conveying of air. Intake volume flow approx. 600 up to 2.250 m³/h.

AERZEN Turbo Generation - Model 5 - Turbo Blowers Generation for Sewage Treatment Processes

by Aerzener Maschinenfabrik GmbH     based in Aerzen, GERMANY

Both positive displacement and turbo machines are used in sewage treatment processes. The experienced application specialist Aerzener Maschinenfabrik GmbH now offers both technologies from one single source. Therefore, plant operators can rest assured to receive tailor-made solutions from Aerzen.

Need help finding the right suppliers?

Let the XPRTs do the work for you