sample gas Equipment in Australasia

Serving Australasia | Office in AustralasiaNear Australasia
2004 Results found
  • Keyword: sample gas ×

  • Location: Australasia ×


HORIBA - Model GPS5 - Gas Sampling System

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

HORIBA gas samplers are suitable for volume-correct taking of gaseous samples during emission and emission measurements. This device can be used wherever gases and gaseous components must be inspected.

High purity solvents - for Organic Trace Analysis

by Merck Millipore     based in Darmstadt, GERMANY

UniSolv® for Organic Trace Analysis - Large retention time range (even low-boiling substances can be reliably detected)- Highest possible purity and minimal signal-to-noise ratio- Best possible batch consistency avoiding analysis repetition, time and cost saving- Specified for GC-Electron Capture Detector (ECD), GC-Flame Ionization Detector (FID) ...

AGT - Model MAK 10-1-TF1-EC1-FM1 - Sample Gas Conditioning Systems

by AGT Thermotechnik GmbH & Co.KG     based in Erkelenz, GERMANY

1 Gas path (PTFE/PVDF). 125 Nl/h per gas path. 1 condensate pump, 1 filter, 1 flowmeter. 1 Electronic control, 3-pole MAK-alarm-contact. Wall-mount housing, mobile version.

AGT - Model BCR 01 - Sample Gas Coolers

by AGT Thermotechnik GmbH & Co.KG     based in Erkelenz, GERMANY

BCRs are the allround talents among compressor coolers. They are installed in all applications where pure coolers are needed without additional conditioning equipment.  BCR sample gas coolers can be optionally equipped with PVDF-, glass- and/or stainless-steel-heat-exchangers. Thus BCR sample gas coolers can cool down nearly every gaseous ...

AGT - Model MAK 10-2 - Sample Gas Conditioning Systems

by AGT Thermotechnik GmbH & Co.KG     based in Erkelenz, GERMANY

MAKs are compressor coolers for highest demands of sample gas quality.  With optional components (pre-separator, filter, flowmeter, acid dosage, humidity sensor, sample gas pump) you can upgrade MAK sample gas coolers to complete integrated sample gas conditioning systems. The flexible, modular design ensures optimal compatibility to all ...

HORIBA - Model GA-360E/F360E Series - Trace Gas Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The GA-360E/F360E Series is a line up of units that provide ultrahigh sensitive, highly accurate, continuous monitoring of trace amounts of impurities contained in gases (N2, O2, He, Ar, H2, and Air) used in the semiconductor manufacturing process. Utilizing a cross-modulation method, GA-360E/F360 Series units have no zero drift due to the ...

MAK Series - Sample Gas Conditioners

by PACE Environmental Products, Inc.     based in Whitehall, PENNSYLVANIA (USA)

The MAK series Sample Gas Conditioners provide clean dry gases to extractive gas analyzers for continuous emission monitoring and process control. The Alfa Laval MAK Sample Gas Conditioner is an essential part of any extractive gas analyzer system. This unit will continuously dehumidify a sample stream and rapidly separate the condensable liquids ...

Gas Sample Probes

by Protea Limited     based in Cheshire, UNITED KINGDOM

Fixed or mobile sample probes, cold or heated, stainless steel or PTFE, Protea is able to provide a solution to measurement from any sample point. With integrated sample filters of ceramic, PTFE, or microfiber construction these probes ensure that the sample passing to the analytical equipment is of sufficient quality to enable long life of ...

Model 22163-U - Gas Sampling Bulb

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Gas Sampling Bulb size 500 mL, PTFE stopcock.

Model 22148-U - Gas Sampling Bulb

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Gas Sampling Bulb size 500 mL, glass stopcock.

Need help finding the right suppliers?

Let the XPRTs do the work for you