sediment transport Equipment

76 Results found
  • Keyword: sediment transport ×

Samplers for suspended sediment: Bed-load transport meter Arnhem type

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

This Bed-load transport meter Arnhem type is used to measure bed-load of coarse sand and fine gravel in rivers and other water- courses.

Eijkelkamp - Model E-365-04.32 - Bed-Load Transport Meter, Arnhem

by Hoskin Scientific Limited     based in Burnaby, BRITISH COLUMBIA (CANADA)

This sampler is used to measure bed-load of coarse sand and fine gravel in rivers and other watercourses. The streamlined sampler is mounted in a frame and consists of a mouth followed by a basket of fine wire meshing (width of the mesh 300 mm). The sharp decrease of the velocity in the wide sampling chambers causes the sediment material to settle ...

Model AQUAscat - Suspended Sediment Profiler

by Aquatec Group Ltd     based in Hampshire, UNITED KINGDOM

The AQUAscat 1000 represents a new generation of high frequency acoustic instrumentation. It has applications in sediment transport studies, including measurement of suspended sediment profiles, precision altimetry, dredge plumes and turbulence. The AQUAscat transmits pulses of high frequency sound on up to four transducers, each of which may ...

Samplers For Suspended Sediment: Delft bottle type

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

This sampler is used to measure suspended sediment transport in rivers and other water courses, from the surface down to 0.1 m above the river bottom. The sediment containing water flows through a bottle shaped sampler. The shape of this sampling body induces a low pressure at the rear face in such a way, that the water enters the nozzle of the ...

Deep core sampler: Akkerman core sampler

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

Using the Akkerman core sampler, samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level, casing tubes with minimal diameter 100 mm) up to a maximum depth of 50 m. The Akkerman core sampler is used in combination with a tripod and hand winch. The sampling tube is beaten into ...

Sampling volatiles: soil coring kit for chemical soil research

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

Soil sampling for the determination of the presence of very volatile components such as benzene, toluene, xylene and chlorinated hydrocarbons should be executed with samplers that prevent the sample from being exposed to air. Preferably the sampling must be done without disturbance of the soilaggregates to prevent mixing with air.

Undisturbed Soil Sampling: Liner Sampler Set

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

With these sets undisturbed soil samples can be taken in a liner applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push-/pull handle. In hard soils the sampler tube can be driven into the soil using the hammer with two nylon heads (shock-absorbing) or ...

Samplers For Suspended Sediment: Water sampler ‘Watertrap’

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

The sampler ‘Watertrap’ has been designed to take representative samples from running water up to a depth of approx. 25 meter. Samples are taken with the stainless steel device by catching part of a horizontal moving column at a certain moment at a certain depth.

Undisturbed soil sampling: Split Tube Sampler

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

The split tube sampler is an apparatus for rapid undisturbed sampling at the surface. The apparatus is very suitable for research on root systems, fertilizing and soil biology.

Deep Core Samplers: van der Horst core sampler

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

The Van der Horst core sampler is used for manual filling of the stainless steel sampling tubes. Sampling can take place in bore holes, casing tubes (minimum diameter 75 mm) or in the beds of canals, lakes, etc. up to a depth of approximately 10 m.

Need help finding the right suppliers?

Let the XPRTs do the work for you