sludge pumps Equipment in Canada

Serving Canada | Office in CanadaNear Canada
848 Results found
  • Keyword: sludge pumps ×

  • Location: Canada ×

EUROPELEC - Scraper Bridge

by EUROPELEC     based in Paris, FRANCE

The job of the EUROPELEC cantral drive thickener is to thicken sludge from municipal or industrial wastewater treatment plants. It can be used in small or medium-sized installations. Effluent is channelled to the centre of the tank in the influent well where it is spread evenly and without turbulence over the thickening zone. The clean effluent is ...

EUROPELEC - Central Drive Thickener

by EUROPELEC     based in Paris, FRANCE

The job of the EUROPELEC CENTRAL DRIVE THICKENER is to thicken sludge from municipal or industrial wastewater treatment plants. It can be used in small or medium-sized installations. Effluent is channelled to the centre of the tank in the influent well where it is spread evenly and without turbulence over the thickening zone. The clean effluent is ...

Portable Sludge Pump – Biosolids Transfer Pump

by WeDoTanks.com LLC     based in Sahuarita, ARIZONA (USA)

Years of experience in the field of Wastewater Treatment led HTI to develop their own exclusive portable sludge / biosolids transfer pump, and now it is available to you. These biosolids transfer pumps are portable - able to be hauled on a trailer with a 3/4-ton pickup truck. This portable sludge pump features a high-volume agitation rate, and is ...

Grindex - Model Salvador Series - Sludge Pump

by Grindex Pumps     based in Tinley Park,, ILLINOIS (USA)

Based on the same basic design as the drainage pumps, the sludge pumps come into action when the liquid gets dirtier than can be handled by the drainage pumps. The design even permits converting between drainage and sludge models allowing you to adapt the pump according to the varying conditions.

Filter Press

by Canamidex International     based in Richmond Hill, ONTARIO (CANADA)

A filter comprises a set of vertical recessed plates, presses against each other by hydraulic jacks at one end of the set. The pressure applied to the joint face of each filtering plate must withstand the chamber internal pressure developed by the sludge pumping system.

Model BBA B - Sludge Pump

by Heide Pumpen GmbH     based in Gelsenkirchen, GERMANY

The B range of pumps have been designed with a clear focus on reliability, efficiency and durability. Featuring an open impeller configuration in combination with a changeable wear plate, facilitating servicing and minimising costs of spares. All B series pumps are fitted with a non return valve in the suction port, eliminating the need for a foot ...

Belt Thickener

by Canamidex International     based in Richmond Hill, ONTARIO (CANADA)

Canamidex sludge thickening system designed to reduce your sludge volume by up to 90%. It is ideal for thickening prior to processes such as digestion or dewatering, and for reducing sludge volume prior to storage or transportation.

V-RAM - Sludge Pumps

by Olson Mfg, LLC     based in Albert Lea, MINNESOTA (USA)

The V-RAM Sludge Pumping Systems are designed for high pressure, high volume and high abrasive sludge pumping 24 hours a day, seven days a week. The Sludge Pumping Systems are used to move sludges with a 12 to 55% solid ratio with pumping volumes ranging from 1 GPM to 428 GPM. Each system is completely designed for particular application and ...

Sludge Pump

by Enviro Safety Products     based in Visalia, CALIFORNIA (USA)

The Allegro Sludge Pump is excellent for pumping standing water containing sand, solids, leaves,or debris. This Allegro pump can pump at a maximum of 50 gallons per minute. Features double inside mechanical seals with silicon carbide faces and the most durable seal design available; a 403 stainless steel sleeve. The motor is continuously filled ...

V-RAM Solids - Sludge pump

by Gerber Pumps International, Inc.     based in Longwood, FLORIDA (USA)

Piston pump handles 'cake type' material at high pressures with unique industry 'free floating' urethane ball check valves and seats for high reliability and long life (excess of 30,000 operating hours without valve change.Agricultural waste processing, rendering operations and MSW (Municipal Solid Waste).Long distanace pipeline pumping with high ...

Related Terms for sludge pumps

Need help finding the right suppliers?

Let the XPRTs do the work for you