sludge pumps Equipment in Italy

Serving Italy | Office in ItalyNear Italy
973 Results found
  • Keyword: sludge pumps ×

  • Location: Europe ×

  • Location: Italy ×

Jurop - Suction and Liquid/Sludge Pumping Units

by Jurop s.p.a.     based in Azzano Decimo, ITALY

Three configuration steps: Jurop pumps: reliability, duration, versatility. Power transmission: electric motors, diesel or petrol engines, compressed-air motors. Last but not least, mounting frame: stationary or mobile. This is Jurop engine driven pumping unit design; custom made and efficient for any application. There is not a standard unit, as ...

EUROPELEC - Scraper Bridge

by EUROPELEC     based in Paris, FRANCE

The job of the EUROPELEC cantral drive thickener is to thicken sludge from municipal or industrial wastewater treatment plants. It can be used in small or medium-sized installations. Effluent is channelled to the centre of the tank in the influent well where it is spread evenly and without turbulence over the thickening zone. The clean effluent is ...

EUROPELEC - Central Drive Thickener

by EUROPELEC     based in Paris, FRANCE

The job of the EUROPELEC CENTRAL DRIVE THICKENER is to thicken sludge from municipal or industrial wastewater treatment plants. It can be used in small or medium-sized installations. Effluent is channelled to the centre of the tank in the influent well where it is spread evenly and without turbulence over the thickening zone. The clean effluent is ...

Portable Sludge Pump – Biosolids Transfer Pump

by WeDoTanks.com LLC     based in Sahuarita, ARIZONA (USA)

Years of experience in the field of Wastewater Treatment led HTI to develop their own exclusive portable sludge / biosolids transfer pump, and now it is available to you. These biosolids transfer pumps are portable - able to be hauled on a trailer with a 3/4-ton pickup truck. This portable sludge pump features a high-volume agitation rate, and is ...

Model CAD - Dynamic Thickener

by COSME srl     based in Torri Di Quartesolo, ITALY

The dynamic thickner CAD is a rotating drum machinery, which is able to thicken the sludges not thickened, till arriving to a concentration of 10-12%.The sludge, conditioned with chemical reagents (polyelectrolytes), is introduced in the mixer, equipped with variable rotations stirrers. This mixer is positioned outside the thickner and is used to ...

Grindex - Model Salvador Series - Sludge Pump

by Grindex Pumps     based in Tinley Park,, ILLINOIS (USA)

Based on the same basic design as the drainage pumps, the sludge pumps come into action when the liquid gets dirtier than can be handled by the drainage pumps. The design even permits converting between drainage and sludge models allowing you to adapt the pump according to the varying conditions.

Model BBA B - Sludge Pump

by Heide Pumpen GmbH     based in Gelsenkirchen, GERMANY

The B range of pumps have been designed with a clear focus on reliability, efficiency and durability. Featuring an open impeller configuration in combination with a changeable wear plate, facilitating servicing and minimising costs of spares. All B series pumps are fitted with a non return valve in the suction port, eliminating the need for a foot ...

Sludge Pumps

by Dinworks OY     based in Helsinki, FINLAND

Sludge Pumps are pumps that are used for pumping the sludge to the dewatering belt filter press. Sludge Pumps manufactured by Dinworks Ltd are known for their high build quality and reliability. Have delivered sludge pumps to clients in all parts of world.

V-RAM - Sludge Pumps

by Olson Mfg, LLC     based in Albert Lea, MINNESOTA (USA)

The V-RAM Sludge Pumping Systems are designed for high pressure, high volume and high abrasive sludge pumping 24 hours a day, seven days a week. The Sludge Pumping Systems are used to move sludges with a 12 to 55% solid ratio with pumping volumes ranging from 1 GPM to 428 GPM. Each system is completely designed for particular application and ...

Manual Polyelectrolite Preparation Unit

by INTERECO S.n.c.     based in Candiolo, ITALY

Manual polyelectrohte preparation unit all made in AISI 304 stainless steel with all necessary components mounted on board. The unit is complete with electrical impeller, water feeder, dosing pump with flowmeter, post-dilution device. The solution can be prepared at a concentration ranging between 0.5% and 1% then is diluted at about 0.1% with the ...

Related Terms for sludge pumps

Need help finding the right suppliers?

Let the XPRTs do the work for you