sludge reduction Equipment in Liberia

Serving Liberia | Near Liberia
261 Results found
  • Keyword: sludge reduction ×

  • Location: Africa ×

  • Location: Liberia ×

Model FID - Sludge Reduction System

by IPCO Power B.V.     based in Dordrecht, NETHERLANDS

Sludge Reduction system installed directly before the centrifuge. As a result of the reduction in fuel droplet size, centrifuges and filters will be able to more effectively remove in-organic contaminants and stay clean much longer. Consequently, sludge generation from centrifuges and filters will be reduced by approx. 50 to 80%. As a result, ...

Sludge Reduction System

by Fluidyne Corporation     based in Cedar Falls, IOWA (USA)

Fluidyne is the first company to commercially design, build and operate SBR technology based on the activated sludge process with over 300 plants operating worldwide. Our intimate process knowledge in biological treatment has led to reducing solid content through biological means. The ISAM sludge reduction system from Fluidyne Can be used as a ...

FreshAWL - Model WOW-Air S™ - Pond Sludge Reduction and Algae Control System

by FreshAWL, LLC     based in Concord, CALIFORNIA (USA)

Manufactured according to the EPA's standards for DfE, FreshAWL WOW-Air S works to penetrate the cellular walls of wastewater sludge that builds up in ponds and collection stations while controlling odor at the same time. This sludge penetration promotes the dewatering of the cellular contents and causes structural collapse. This product ...

Sonolyzer - Ultrasound Sludge Disintegrator

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

Sludge disintegration has been used widely throughout Europe and is finally making its way into the United States. The Sonolyzer ultrasound technology achieves effective sludge reduction. The advantage of ultrasound treatment is that it does not require chemicals or extreme environmental conditions (either pressure or temperature). Ultrasound ...

Colsen - Thermophilic Sludge Digestion System

by Colsen International b.v.     based in HULST, NETHERLANDS

The treatment of WWTP sludge represents a considerable cost for a sewage purification plant. In case the sludge amount is lowered the associated costs can be reduced. An efficient way for the reduction of the sludge amount is thermophilic sludge digestion. When compared with conventional mesophilic digestion thermophilic conditions take care of ...

Model BDS - Belt Drying System for Sludge

by ANDRITZ Separation - a division of the Andritz Group     based in Waddinxveen, NETHERLANDS

Flexible and low-grade energy use The patented ANDRITZ AG belt drying system (BDS) is characterized by its flexibility and ability to use a wide range of energy sources, particularly low-grade waste energy. BDS can be used for drying a broad range of products, such as industrial and municipal sludge, cow manure, biomass, as well as pre-treated ...

Reliant - Model Sewper Rx - Sludge Digester

by Reliant Water Technologies     based in New Orleans, LOUISIANA (USA)

Sewper Rx is a polymicrobial blend of bacteria, enzymes, and nutrients, scientifically formulated for the biodegradation of organic compounds found in all types of wastewater systems. These bacteria have been subjected to a process known as ‘anhydrobiotic engineering’ which causes them to change their behavior, allowing them to adapt ...

SPIRACONE™ Upflow Sludge Blanket Clarifier

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

Eliminate Moving Parts and Related Maintenance With the SPIRACONE Upflow Sludge Blanket Clarifier. The SPIRACONE Clarifier is an upflow sludge blanket clarifier that combines mixing, flocculation and sedimentation in a single basin. Raw water and chemicals are hydraulically mixed then pass upward through the various zones within the basin for ...

Anaerobic Digestion & Solids Reduction

by Claro Inc     based in Montreal, QUEBEC (CANADA)

Claro Big Bubble Gun Mixer systems are a proven anaerobic digester mixing technology that significantly reduces sludge disposal volumes and disposal costs, provides greater volatile solids destruction and overall biogas production, reduces sludge dewatering costs and presents almost no oversight or maintenance requirements. This superior process ...

Model cfCPI - Corrugated Plate Interceptor Cross-Flow for Total Suspended Solids Reduction

by MPPE & TiPSS Technology – Veolia Water Technologies     based in Ede, NETHERLANDS

The cross-flow CPI is applied when oil as well as suspended solids are to be separated. Generally it is advisable to use cfCPI when (average) TSS concentrations are above 200 mg/l, as the cross-flow as well as the cone shaped sludge settling zones give improved separation and thickening.

Need help finding the right suppliers?

Let the XPRTs do the work for you