Topics

Sections

solar cells Equipment

723 Results found
Order by:
Recommended | 
Alphabetical

MAXIS SOLAR CELLS

by Photovoltech N.V.

The MAXIS brand name already tells it all. The name results from the combination of the high efficiency that the Photovoltech MAXIS cells offer (MAX) and the technique of Isotropic texturization (IS) that Photovoltech uses in production.The multicrystalline silicon solar cell technology of Photovoltech is characterized by several advanced high ...

MAXIS BC+ SOLAR CELL

by Photovoltech N.V.

The MAXIS BC+ is a monocrystalline back contact silicon solar cell. The typical busbars that are installed at the front of traditional solar cells have been transferred to the back. This unique technology has several advantages. The current trend is to integrate solar cells practically and aesthetically into our live- and work environment. ...

Solar Cell Coating

by Meyer Burger

Solaris The Solaris is designed for front- and back side coating of crystalline solar cells. The Multi layer capability allows passivation and “silane free” SiN – AR (Anti Reflective) coating on the front side, with the freedom to select optical criteria (refractive indices etc.) as well as passivation and Al-contact layer ...

Spi-Assembler - 7000 - Automated Solar Cell Assembly

by Spire Corporation

The Spi-Assembler 7000 is an automated production machine that interconnects solar cells by soldering flat metal leads, or tabs, to cell contacts. Solar cells are processed at a throughput of up to 700 cells per hour with high yield.

cetisPV-GR - Grid and Contact Resistance of Solar Cells

by h.a.l.m. elektronik gmbh

The grid resistance switching unit cetisPV-GR is an add-on to our photovoltaic curve tracer cetisPV-CTL1. It allows the measurements of grid printing resistances on the solar cell surface as well as cell contacting resistances. It is designed to be used in demanding laboratory and production environments of front and rear side contacted solar ...

cetisPV-XF2-Z - Solar Simulator for Solar Cells and Small Modules

by h.a.l.m. elektronik gmbh

cetisPV-XF2 is an innovative multilevel xenon flasher for the sun simulation (AM1.5). The illumination area (220 x 220 mm2) covers the range of solar cells up to small moduls. Its outstanding features are the selfadapting microprocessor controlled regulation of the irradiance curve. cetisPV-XF2 fully satisfies the requirements of IEC60904-9 for ...

cetisPV-Contact 1 - Contacting Station for Solar Cells

by h.a.l.m. elektronik gmbh

cetisPV-Contact 1 is designed to be used for manual or semi-automatic cell tester in laboratory or in small production environments. uipped with an optional pneumatic lift (two hand security push bottons) a complete handling cycle of loading, measuring and unloading of a cell specimen can by performed within approximately 6 seconds.cetisPV-Contact ...

ILM - Photovoltaic: Inline Processing Of Crystalline Solar Cells

by InnoLas Systems GmbH

The Inline Machine Module ILM is used in the photovoltaic industry wherever the transport of substrates during the processing of crystalline solar cells is organized as an inline process, or where separate production steps take more than one second due to the nature of the processing.

IV5 - Solar Cell I-V Measurement System

by PV Measurements, Inc.

This system includes the light source and the measurement equipment needed to measure I-V curves for solar cells 5 cm x 5 cm and smaller. Its solar simulator illuminates the test device while the electronic load sweeps the cell voltage from a reverse-bias condition, through the power quadrant, and beyond Voc. Synchronized, precise measurements of ...

LOANA - Solar Cell Analysis System

by pv-tools GmbH

The LOANA system combines various measurement methods in one machine in order to analyze silicon solar cells by pushing a single button.


Air & ClimateEnergy & RenewablesEnvironmental ManagementHealth & SafetyMonitoring & TestingSoil & GroundwaterWaste & RecyclingWater & Wastewater