solid waste Equipment in Mississippi

Served | Office inNear
1851 Results found
  • Keyword: solid waste ×

  • Location: USA ×

  • Location: Mississippi ×


Skim-pak - Model 11800-DH - Flow - Control and Floating Decanter Systems

by Skim-pak     based in Hayward, CALIFORNIA (USA)

The 11800-DH has flow-controlled weirs with adjustable flow rate capabilities. The standard flow rate is 3 cubic meters per minute per meter of weir. The 11800-DH has 0.5 meters of total weir, and therefore is normally operated at a flow rate 1.4 m3/min, 370 gal/ min. Maximin flow rate is 500gpm. The 11800-DH excludes solid during the aeration ...

Model 0 - Compress Melt Unit

by Science Applications International Corporation (SAIC)     based in San Diego, VIRGINIA (USA)

The CMU is a compactor that converts shredded, plastic waste into a dense disk, that is heat sealed into an odor barrier bag suitable for long-term storage. The CMU is the principal component of the plastics waste processor. This 'heated compactor' converts shredded, plastic waste into a dense disk, that is heat sealed into an odor barrier bag ...

Model 1 - Compress Melt Unit

by Science Applications International Corporation (SAIC)     based in San Diego, VIRGINIA (USA)

The CMU (MOD 1 PWP) significantly improves the performance of the original unit by increasing processing rates, reliability and decreasing maintenance. The modified plastics waste processor, CMU (MOD 1 PWP), was designed to significantly improve upon the performance of the original unit by increasing processing rates and reliability and decreasing ...

Plastics Waste Processor (PWP)

by Science Applications International Corporation (SAIC)     based in San Diego, VIRGINIA (USA)

This product compresses shipboard generated plastic waste into a dense, sanitary disk suitable for long-term storage. SAIC provides the U.S. Navy's Plastics Waste Processor (PWP), which compresses shipboard generated plastic waste into a dense, sanitary disk 20 inches in diameter suitable for long-term storage.

Diamond Z - Model SWG1600 - Traditional Stationary Garbage Shredding Systems

by Diamond Z     based in Caldwell, IDAHO (USA)

Unlike traditional stationary garbage shredding systems, the SWG 1600 is completely on-site mobile. Track mounted, and self-propelled, the SWG 1600 can be driven on the working face of the landfill. Ground garbage is deposited directly into the landfill cell, where it can be spread by compactors. The heart of the machine is a high speed Hammermill ...

Indirect Thermal Desorption System

by KMT International, Inc.     based in Fremont, CALIFORNIA (USA)

KMT International Inc presents unique Indirect heat thermal desorption system uses indirect thermal desorption to recover and recycle hydrocarbon contaminated solids for safe on-site disposal. This is a portable system designed to thermally remove hydrocarbons from solids. Using the latest in resistive element technology to heat the rotors and ...

Biological Waste Management System

by ESD Waste2Water, Inc.     based in Ocala, FLORIDA (USA)

Point of Generation Biological Waste Management System. ESD's Green Squeeze Waste Compactors are produced in marine Grade Aluminum, designed to withstand even the most severe weather conditions. Our Green Squeeze waste compactors are perfectly suited for all kinds of installations and institutions. The Chemical Containment and Recovery Pads are ...

Taskmaster - Model TM1600 - Twin Shaft Shredder For Solids/Liquids and Institutional Waste

by Franklin Miller Inc.     based in Livingston, NEW JERSEY (USA)

The Taskmaster Model TM1600 is a powerful workhorse that can shred heavy solids in both gravity and liquid systems. This unit can be installed horizontally with a stand, hopper vertically for channel or pipeline applications with flange adapters. Typical applications include rejects and returns, garments, filters, containers, plastics, turnings, ...

Taskmaster - Model TM2300 - Versatile, Heavy-Duty, Twin Shaft Shredder

by Franklin Miller Inc.     based in Livingston, NEW JERSEY (USA)

The Taskmaster TM2300 is a versatile, heavy-duty, twin shaft shredder available with up to 50 hp drive to handle such applications as waste, rejects, packaging materials, hides, containers, recycling, rendering, pulp and paper, plastic and plastic drums, crates, pallets, medical waste, cans, PET/HDPE bottles, computer printouts, pharmaceutical ...

Taskmaster - Model TM2800 - High-Power Heavy-Duty Shredder

by Franklin Miller Inc.     based in Livingston, NEW JERSEY (USA)

The Taskmaster Models TM2800 are suitable for a variety of shredding applications that demand high power, large throat openings and extra-heavy duty construction. These units employ up to 100 hp motors and planetary gear drives to generate massive force to the cutters. They have proven their unique versatility and dependability in a wide variety ...

Need help finding the right suppliers?

Let the XPRTs do the work for you