thermal oxidizers Equipment in El Salvador

196 Results found
  • Keyword: thermal oxidizers ×

  • Location: Latin America ×

  • Location: El Salvador ×


Process Combustion - Direct Fired Thermal Oxidisers

by Process Combustion Ltd

Direct fired thermal oxidisers by Process Combustion Ltd. can treat very high concentrations of volatile organic compounds (VOC’s) in waste gas and waste liquid streams safely and effectively. The waste streams, in some cases, can be injected through the burner system and be used as a fuel. Additional energy saving equipment such as waste ...

Thermal Oxidisers

by Environmental Integrated Solutions

Thermal oxidisers use high temperature to convert contaminants to carbon dioxide and water vapour. Normally the reaction takes place at a temperature ranging from 750oC to 850oC. At these temperatures, with good mixing and sufficient oxygen, the destruction efficiency in the combustion chamber is almost 100%.

Process Combustion - Recuperative Thermal Oxidisers

by Process Combustion Ltd

Process Combustion Ltd.’s range of recuperative oxidisers can be designed with a very high destruction efficiency capability combined with integral heat recovery systems to help reduce operational cost. Systems are supplied with a primary heat exchanger to heat the incoming air stream. Additional secondary heat recovery systems can be ...

Process Combustion - Catalytic Thermal Oxidisers

by Process Combustion Ltd

Catalytic thermal oxidisers by Process Combustion Ltd. operate at significantly lower temperatures than equivalent thermal systems. With the ever increasing cost of fuel, catalytic oxidation systems can offer a cost effective, energy efficient solution to your air pollution needs.

Recuperative Oxidisers

by BABCOCK WANSON - CNIM Group

Recuperative oxidisers are targeted at industrial process where there is a combination of energy demand and effluent oxidation. These types of thermal oxidisers are mainly suitable for high VOC concentrations and lower flow rates. The process plant includes: An inverter driven effluent transfer fan, A pre-heater for the VOC or odour laden air, The ...

Tecam - Regenerative Thermal Oxidizers (RTO)

by Tecam Group

Regenerative Thermal Oxidizer RTO is the most widely-used oxidation technique nowadays for Volatile Organic Compounds VOC emission treatment to be used with a wide range of solvents and processes. Tecam Group designs, assembles, commercialises and installs equipment for VOC emissions treatment through Regenerative Thermal Oxidizers RTO technology.

Process Combustion - Regenerative Thermal Oxidisers (RTO`s)

by Process Combustion Ltd

Regenerative thermal oxidisers (RTO’s) by Process Combustion Ltd. can offer very high destruction efficiency of VOC’s combined with high energy efficiency. This high energy efficiency enables the unit to operate at very little or zero fuel input. Where the heat contribution of the VOC’s is significant, the RTO can release the ...

Catalytic Oxidisers

by Environmental Integrated Solutions

In a thermal oxidiser, Volatile Organic Compounds are converted to carbon dioxide and water vapour in a combustion reaction at temperatures typically above 750oC. This reaction can be forced to proceed at much lower temperatures in the presence of an appropriate catalyst.

Tecam - Zeolite Rotor-Concentrator + Regenerative Thermal Oxidizer (RTO)

by Tecam Group

The Zeolite Rotor-Concentrator + Regenerative Thermal Oxidizer unit consists of a Zeolite wheel plus an oxidizer unit right after it. The basic operating principle of the Zeolite Rotor-Concentrator equipment is the Volatile Organic Compound VOC emission treatment by adsorption process. The adsorption takes place using a porous material called ...


TRITON - Model III Series - Regenerative Thermal Oxidizer

by Catalytic Products International (CPI)

TRITON III-Series Regenerative Thermal Oxidizers are the traditional three-tower (or multiple tower) designed RTO. While these systems require somewhat higher initial cost, their benefits are realized by being able to achieve up to 99.9% removal efficiency. In some applications, this level of removal efficiency may be required to meet permitting ...

Need help finding the right suppliers?

Let the XPRTs do the work for you