tubular ceramic membranes Equipment

11 Results found
  • Keyword: tubular ceramic membranes ×

Kleansep - Tubular Ceramic Membranes Module

by Orelis Environnement SAS     based in Salindres, FRANCE

The housings or modules KLEANSEP consist of tubular ceramic membranes and are available in six versions may contain from 1 to 138 membranes. The modules are composed of membranes Kleansep assembled within a casing of stainless steel 316L. The tightness of the membranes in the module is ensured by gaskets available in various polymers (see table ...

INSIDE CéRAM - Tubular Ceramic Membranes

by Tami Industries     based in Nyons, FRANCE

Tubular ceramic membranes ø 10 entirely made of high purity materials. Two geometries are available, correspond to user's needs. These ceramic membranes allow all operations of separation in Microfiltration, Ultrafiltration and Fine Ultrafiltration. The permeate flux performances, their low hold-up volumes and reduced energy consumption ...

Filtanium - Tubular Ceramic Membranes

by Tami Industries     based in Nyons, FRANCE

Tubular ceramic membranes ø 10 entirely made of high purity materials. Two geometries are available, correspond to user's needs. These ceramic membranes allow all operations of separation in Microfiltration, Ultrafiltration and Fine Ultrafiltration. The permeate flux performances, their low hold-up volumes and reduced energy consumption ...

Isoflux - Tubular Ceramic Membranes

by Tami Industries     based in Nyons, FRANCE

Tubular ceramic membranes entirely made for food processing & bio-industries.The ISOFLUX™ membrane improves performances of existing separations and allows separations which were difficult or impossible to make before.

Kleansep - Ceramic Membranes Module

by Orelis Environnement SAS     based in Salindres, FRANCE

Tubular Ceramic membranes KLEANSEP are robust and offer unrivaled filtration performance. Kleansep ceramic membranes are available in a wide range of cutoff. They are used in the filtration of suspensions, emulsions and solutions. The robustness of the membranes allows the separation of organic and mineral particles, oils, polymers. The ceramic ...

GEA Filtration - Model C - Membrane Filtration Pilot Plant

by GEA Filtration     based in Hudson, WISCONSIN (USA)

The Model C membrane filtration pilot plant is a flexible unit for testing ceramic membranes on low pressure Membrane Filtration and Ultra Filtration applications. Model C pilot plants can be configured to run higher pressure Ultra Filtration/Nano Filtration applications as well as other tubular membranes (inorganic or polymeric).

CFS Ceramic Membranes

by SJE-Rhombus     based in Detroit Lakes, MINNESOTA (USA)

Ceramic Filtration Solutions offers ceramic tubular and flat sheet membranes for micro and ultra-filtration processes for water and wastewater applications.SJE-Rhombus, the industry-leading manufacturer of water and wastewater control solutions, provides one of the most complete CFS (Ceramic Filtration Solutions) product lines, including tubular ...

Minipilot - Ceramic Membranes

by Orelis Environnement SAS     based in Salindres, FRANCE

The minipilot works with tubular ceramic membranes and organic membranes, with a tank of 10 liters. Perfect for feasibility studies. 1 Pilot 2 membrane technologies: Microkleansep Module equipped with a ceramic membrane mineral. Rayflow  Module equipped with a flat membrane Pleiade. The versatile driver to test our range of organic membranes ...

Valisette Ceramic Test Cell

by Sterlitech Corporation     based in Kent, WASHINGTON (USA)

The Valisette ceramic test cell kit is made of 316L stainless steel and is designed for choosing the best crossflow/tangential flow ceramic membrane for your separation procedure.The Valisette ceramic test cell unit is 250mm long and works with tubular ceramic membranes. The recommended re-circulating flow rate is between 200 and 600 liters/hour. ...

FerroCep

by Hyflux Membranes     based in Singapore, SINGAPORE

Based on proven technology which combines a rugged tube made of sintered stainless steel powder with patented coating technology, a sintered titanium dioxide layer is permanently bonded to the porous stainless steel tube of FerroCep. This inert and highly durable inorganic membrane can withstand elevated temperatures and pressures, concentrated ...

Need help finding the right suppliers?

Let the XPRTs do the work for you