waste sites Equipment in Dominica

Serving Dominica | Near Dominica
862 Results found
  • Keyword: waste sites ×

  • Location: Latin America ×

  • Location: Dominica ×

Macpresse - Model Mac 112 - Commercial and Municipal Solid Waste at In-Door Facilities and for Landfill Sites

by Macpresse Europa S.R.L     based in Vernate, ITALY

Capacity: 50/60 tons/hour. The MAC 112 baling press is the top-end model of the e Macpresse baler range. The exceptional solid static structure and the use of special bolted Hardox liners make it the ideal baler for higher volumes of MSW and commercial waste. With a thrust of 200 t, the MAC 112 produces high density bales for optimizes storage and ...

Macpresse - Waste Bale Wrapper

by Macpresse Europa S.R.L     based in Vernate, ITALY

Dense wrapped bales make storing 'IN the open possible. Balers resolve many of the problems connected with storing and moving waste from town centres to landfill sites.

Model VOC & POP - Hydrocarbon Contaminated Sites

by econ industries GmbH     based in Starnberg, GERMANY

Applications and design: Process: Indirect Heated Vacuum Thermal Desorption / Vacuum Distillation. Source: Abandoned, multi-contaminated hazardous waste landfills. Brownfields, old industrial production facilities, coke oven plant sites contaminated with toxic substances, such as Dioxins, PCB, PAH. Chlorinated organic compounds, organic lead ...

Macpresse - Model Mac 1000 - Waste Paper Shredder

by Macpresse Europa S.R.L     based in Vernate, ITALY

Macpresse shredders are designed for shredding waste paper. Macpresse makes three different models of paper shredders identified by the names MAC 1000, MAC 1500 and MAC 2000. Great efficiency and output, along with a particularly sturdy construction, are the design characteristics of these Macpresse shredders. Designed according to the principle ...

Blackwater - On-Site Chemical Generator

by MIOX Corporation     based in Albuquerque, NEW MEXICO (USA)

The MIOX Blackwater trailer is a mobile chemical-free disinfection system designed to meet high volume disinfection needs with ease. This dual-MIOX system design can meet fluctuating oxidant demand and water volume all within a footprint no larger than 9’ by 40’. Safe oxidizing chemistry generated at your site when you need it, with ...


OZONATOR - Model NG-3000 - Medical and Bio-Hazard Waste Treatment Technology

by OZONATOR Industries Limited     based in Regina, SASKATCHEWAN (CANADA)

The OZONATOR is the complete solution to your bio-hazardous waste needs. With zero emissions, ease of operation, quick cycle time and low operating costs the OZONATOR is not only a better solution but also a more cost-effective solution. The functional part of this system is a combined process that loads un-segregated, bio-hazardous waste directly ...

Skim-pak - Model 11800-DH - Flow - Control and Floating Decanter Systems

by Skim-pak     based in Monterey, CALIFORNIA (USA)

The 11800-DH has flow-controlled weirs with adjustable flow rate capabilities. The standard flow rate is 3 cubic meters per minute per meter of weir. The 11800-DH has 0.5 meters of total weir, and therefore is normally operated at a flow rate 1.4 m3/min, 370 gal/ min. Maximin flow rate is 500gpm. The 11800-DH excludes solid during the aeration ...

Skim-pak - Model 11840-DH - Flow - Control and Floating Decanter Systems

by Skim-pak     based in Monterey, CALIFORNIA (USA)

The 11840-DH has flow-controlled weirs with adjustable flow rate capabilities. The standard flow rate is 3 cubic meters per minute per meter of weir. The 11840-DH has 4 meters of total weir, and therefore is normally operated at a flow rate 11.2 m3/min, 2958gal/ min. Maximin flow rate is 4,000gpm. The 11840-DH excludes solid during the aeration ...

Macpresse - Municipal Solid Waste Sorting System

by Macpresse Europa S.R.L     based in Vernate, ITALY

Material Recycling Facility for urban solid waste. System line to separate the various materials mechanically with the help of rotating screens, optical readers and, in some cases, manually. Like all our sort systems, the whole line can be customized on the basis of the customer's requirements.

Skim-pak - Model 11820-DH - Flow - Control and Floating Decanter Systems

by Skim-pak     based in Monterey, CALIFORNIA (USA)

The 11820-DH has flow-controlled weirs with adjustable flow rate capabilities. The standard flow rate is 3 cubic meters per minute per meter of weir. The 11820-DH has 2 meters of total weir, and therefore is normally operated at a flow rate 6 m3/min, 1580 gal/ min. Maximin flow rate is 2,000gpm. The 11820-DH excludes solid during the aeration ...

Need help finding the right suppliers?

Let the XPRTs do the work for you