wastewater treatment systems Equipment in Mississippi

Served | Office inNear
1682 Results found
  • Keyword: wastewater treatment systems ×

  • Location: USA ×

  • Location: Mississippi ×

Wastewater Treatment Systems

by Aqueonics, Inc.     based in Greenville, SOUTH CAROLINA (USA)

Alternating Aerobic/Anaerobic Trickling Filter. Extended Aeration. Sequence Batch Reactor (SBR). Activated Sledge. High Quality Effluent (HQE) Single Use System. Rotating Biological Contactor (RBC).

CTCII - Conductivity/TDS Chemical Treatment Controller / Cooling Tower Controller

by Myron L Company     based in Carlsbad, CALIFORNIA (USA)

The unique circuitry of the CTCII Chemical. Treatment Controller guarantees accurate and reliable measurements. Drift free performance is assured by “field proven” electronics, including automatic DC offset compensation and highly accurate drive voltage.

Stevens Greenspan - Model pH3000 - pH Measurement Sensor

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

The Greenspan pH3000 is a complete self contained pH measurement and data logging system for monitoring of pH in a wide variety of environmental applications. The sensor utilises a robust gel filled pH electrode together with optical isolation and advanced signal conditioning to ensure long term accurate data. The sensor also features a field ...

Stevens - Model SDT-II - Submersible Depth Transmitter

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

Note: The SDT-II has been discontinued by Stevens and replaced with the SDX Pressure Sensor. Please contact Stevens Water for more details.

Stevens - Model 5180 - Ultrasonic Level Transmitter (ULT) Sensor

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

The Ultrasonic Level Transmitter is a non-contact, solid state device for the measurement of level, volume, proximity, or distance in corrosive material environments. The IRU operates by transmitting a series of ultrasonic sound waves in a cone shaped pattern. Sound waves reflect from the target being measured back to the sensor, which measures ...

Stevens - Model Style E - Staff Gages

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

Staff gages provide a quick and easy visual indicator of water level. Made with a durable porcelain enamel finish to resist corrosion. Style E staff gages feature graduated marks every tenth of a foot. Each section is 3.5 inches wide, and is available in 1, 2, or 5 foot tall sections. Style E is not numbered, so figure plates are available for ...

Stevens - Model Style I - Staff Gages

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

Staff gages provide a quick and easy visual indicator of water level. Made with a durable porcelain enamel finish to resist corrosion. Style I staff gages feature graduated marks every .25 inches. Numerical marks are printed every inch. Style I comes in standard sections, each 2.5 inches wide, with heights available in 14, 18, 24, 36 and 48 ...

Stevens - Figure Plates for Staff Gages

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

Made with the same durable porcelain enamel finish as our staff gages, our numbered plates are available for custom level marking. Plates come in three sizes: 2” x 3”, 3” x 4” and 4' x 6'.

Stevens - Model Style M - Staff Gages

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

Staff gages provide a quick and easy visual indicator of water level. Made with a durable porcelain enamel finish to resist corrosion. Style M staff gages are marked in metric units, with graduation marks every centimeter and numbering every decimeter. Style M is sold in one size, 65mm wide by 1 meter tall. Custom levels may be marked by using our ...

Stevens - Model Style A - Staff Gages

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

Staff gages provide a quick and easy visual indicator of water level. Made with a durable porcelain enamel finish to resist corrosion. Style A staff gages feature graduation marks every 1, 1/10 and 0.02 feet. Total elevation is also marked. Style A comes in sections, each 4 inches wide and 3.33 feet in height. Multiple sections may be stacked for ...

Need help finding the right suppliers?

Let the XPRTs do the work for you