water regulations Equipment in Bulgaria

Served | Office inNear
1595 Results found
  • Keyword: water regulations ×

  • Location: Europe ×

  • Location: Bulgaria ×

Model Series M 5600 C - AQUAprocessor

by Controlmatik ABW     based in Domzale, SLOVENIA

AQUAprocessor series M 5600 C is unit built with main CPU (central processor unit) and can be expanded through various other extension modules, as to the system. It is designed to control the process values on water plants, swimmingpools, waste water plants or in industry. Regulation cabinet can be configured for manual or automatic output ...

Model KD 34 - Adjustable Overflow Weir

by Danish Wastewater Equipment A/S     based in Vejle, DENMARK

The adjustable overflow weir model KD 34 is designed for controlling the inlet volume in inlet structures and distributor structures. It may also be used in outlet structures and in sand traps to control the water level and in grease traps to remove grease from the surface of the water. The adjustable overflow weir is placed between two side ...

Model Series M 5110 - Flow Proportional Control Unit

by Controlmatik ABW     based in Domzale, SLOVENIA

Electronic control unit is based on a CPU unit with 4 -20 mA input. It controls the motor valve unit M 3521 C on a flow proportional basis. It is intended only for the dosage of chlorine gas proportional to the water flow. User simply connects the motor valve to the unit and connects the 4-20 mA signal from flow meter. When the flow changes, the ...

Decentralized Automation With CAN Networking

by Controlmatik ABW     based in Domzale, SLOVENIA

Plant constructors are increasingly being confronted with the demand for greater flexibility while having to cope with more intense time and cost pressures. Decentralized automation systems go a long way to meet these new requirements. Thus, for example, decentralized , intelligent compact controllers can be used to turn the components of modulary ...

Stop logs - HRD

by Fontana R, s.r.o.     based in Brno, CZECH REPUBLIC

Stop logs are designed to stop or regulate water passage in open canals and water reservoir partitions. Stop log consists of frame, stop planks and accessories. The individual boards are equipped with hinge pins to ease the handling. The stop logs can be designed and supplied for the width of canal and the stopping height up to 2500 mm.

PRC - Model 4000 - Low Flow with Check Valve 5 to 6 GPM

by Hendrickson Bros.     based in Corona, CALIFORNIA (USA)

The new PRC4000 Series Preset Pressure Regulator is a 1/2” low flow pressure regulator with a built in check valve. It will prevent line drainage from causing unwanted erosion and water puddles. This regulator works by remaining closed with no flow until the check valve opens. After opening, the sprinkler or watering system will operate at ...

Jet Regulator

by bgu-Umweltschutzanlagen GmbH     based in Bretzfeld (DE), GERMANY

The most important functional elements of the Jet Regulator regulator are the pivoted radial gate, the jet shield and the regulating weight. These remain in the rest position during low discharge periods with the pivoted radial gate in the fully open position. When a storm event occurs and the water level upstream of the unit increases, the water ...

Compact Regulator

by bgu-Umweltschutzanlagen GmbH     based in Bretzfeld (DE), GERMANY

The Compact Regulator compact discharge regulator is installed in the structure's wet well and is acted upon by the upstream water level. The compact design consists of an integral float housed in a watertight enclosure which controls the position of the pivoted radial gate. Because of this watertight enclosure, the large variation of the upstream ...

Balance Regulator

by bgu-Umweltschutzanlagen GmbH     based in Bretzfeld (DE), GERMANY

The most important functional elements of the Balance Regulator regulator are the pivoted radial gate, the weighing trough and the regulating weight. These remain in the rest position during low discharge periods with the pivoted radial gate in the fully open position. As the influent discharge increases, it flows through the regulator housing ...

Model SURE-FLOAT - Floating Regulator System

by Grande Water Management Systems     based in Laval, QUEBEC (CANADA)

The SURE-FLOAT Floating Regulator System is designed to maintain a constant and accurate flow from a minimum of 80 gpm (5 L/s) to a maximum of 480 gpm (30 L/s) for upstream water levels varying from 0 to 20 feet (6 m). The SURE-FLOAT Floating Regulator has been used for flow control from settling ponds, tailings ponds, sedimentation tanks, storm ...

Need help finding the right suppliers?

Let the XPRTs do the work for you