water reuse Equipment in Guam

Served | Office inNear
794 Results found
  • Keyword: water reuse ×

  • Location: Asia & Middle East ×

  • Location: Guam ×

Model WWT II - VigorOx

by FMC Corporation     based in Philadelphia, PENNSYLVANIA (USA)

VigorOx WWT II, FMC’s peracetic acid for waste water disinfection FMC’s VigorOx WWTII is a highly effective biocide demonstrating superior microbial reductions of fecal coliform compared to gaseous chlorine or bleach at lower use rates and shorter contact times. VigorOx WWTII is a 15% peracetic acid (PAA) formulation which is USEPA ...


CeraQ - Ceramic Filter Modules

by QUA Group     based in Canonsburg, PENNSYLVANIA (USA)

CeraQ ceramic filter membranes offer superior performance in challenging oil removal applications and are ideal for wastewater recycle / reuse applications in a wide range of industries such as upstream oil & gas, petrochemicals, refinery, food & beverage, and textiles. Each CeraQ module is available in four different pore sizes: 0.4, 0.05, 0.01 ...


Model 800 Watt - Watt Amalgam Ultraviolet Systems

by atg UV Technology     based in Wigan, UNITED KINGDOM

As the latest product in the atg UV range, the new line of 800 Watt UV reactors (UVLW and UVLX) has been extensively developed using the latest in amalgam lamp technology.  The new design will have similar efficiencies to current amalgam technologies, but will allow installation in a smaller footprint with fewer components.


BLABO - Oil Tank Cleaning System for Crude Oil, HFO and Other Black Oil Tanks

by Oreco A/S     based in Vaerloese, DENMARK

Our patented BLABO® system is an automated, mobile and modular, non-man entry oil tank cleaning system. Especially designed to clean large volume, difficult-to-clean oil tanks, the BLABO system can be tailored to meet your individual needs – whether you simply need efficient tank cleaning or if you require tank cleaning, sludge ...


QUV - Accelerated Weathering Tester

by Q-Lab Corporation     based in Westlake, OHIO (USA)

The QUV accelerated weathering tester reproduces the damage caused by sunlight, rain and dew. In a few days or weeks, the QUV tester can reproduce the damage that occurs over months or years outdoors. To simulate outdoor weathering, the QUV tester exposes materials to alternating cycles of UV light and moisture at controlled, elevated ...


Rainstore3 - Modular & Stackable Structure

by Invisible Structures, Inc.     based in Golden, COLORADO (USA)

Rainstore3 is a modular and stackable structure used to store stormwater underground. Made from injection molded plastic, a single panel contains 36 vertical columns and exceeds H-20 loading, allowing the construction of driving areas, parking lots, or other small structures above the system. Built-in compression fittings allow units to be easily ...


EVALED RV - Model MVR Series - Mechanical Vapor Recompression System - Falling Film Wastewater Evaporators

by EVALED     based in Zoppola (Pordenone), ITALY

The MVR Wastewater Evaporator is based on forced circulation technology through a falling film heat exchanger. It operates in two stages both of which have an independent mechanical vapor recompression system: falling film followed by external heat exchanger. The falling film stage carries out the preconcentration of the solution, while the forced ...


Biowater - Model CFIC - Continuous Flow Intermittent Cleaning

by Biowater Technology     based in Cumberland, RHODE ISLAND (USA)

Biowater’s proprietary CFIC technology offers industry-leading performance when compared with widely used Activated Sludge and MBBR solutions. The small footprint, combined with Biowater’s approach to process design makes this far more versatile than existing solutions, making it very suitable for a wide range of existing WWTP.


PRAB Dualpak - Chip Briquetter

by PRAB, Inc     based in Kalamazoo, MICHIGAN (USA)

PRAB's Dualpak briquetter by Neff Press increases the value of your metal chips, turnings and swarf by compressing it into solid briquettes. Augers feed chips into a compression chamber. Then two opposing hydraulic cylinders press the metal, squeezing out the cutting fluid or coolant and creating a compact, up to 99 percent dry, briquette.

Proco Style - Model RE-231/RE-221 - Eccentric Reducer for Pipes

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

Proco Style RE-231 eccentric rubber expansion joint is a single open wide arch type. Eccentric in design, the expansion joint body tapers on one side transitioning two different flange sizes. Proco Style REFA-231 eccentric rubber expansion joint is a single filled wide arch design generally used for slurry or abrasive services. This design has 50% ...

Need help finding the right suppliers?

Let the XPRTs do the work for you