Equipment in Cyprus

Serving Cyprus | Office in CyprusNear Cyprus
106488 Results found
  • Location: Europe ×

  • Location: Cyprus ×

Memosens - Cutting-edge Sensor System for Liquid Analysis

by Endress Hauser Instruments International AG     based in Reinach, SWITZERLAND

Memosens technology revolutionizes liquid analysis technology. It converts the measured value to a digital signal and transfers it inductively to the transmitter, eliminating the problems associated with moisture and corrosion – the sensors could even be operated under water! With signal alarms in the event of transmission disruption, ...

ANDRITZ Vandenbroek - Rotary Drum Dryer

by ANDRITZ Separation - a division of the Andritz Group     based in Waddinxveen, NETHERLANDS

The rotary drum dryer is suitable for drying woody biomass, agricultural products, and municipal solid waste (MSW). For the production of alternative fuels as well as in the area of waste-to-energy, ANDRITZ Vandenbroek rotary drum dryers are applied to decrease the moisture of the material to the desired level fo downstream process steps.

PetroAlert - Model Series 9100 - Online Gas Chromatograph for Hydrocarbon Measurement

by Baseline a MOCON company     based in Lyons, COLORADO (USA)

The PetroAlert Series 9100 is designed specifically for the oil and industry.   Incorporating all of the key features of the Series 9100 GC's while providing a FID (Flame Ionization Detector) for extra hydrocarbon sensitivity. Light hydrocarbon analysis, C1 to C5, is completed in 30 seconds while preserving the C1 to C2 separation. ...

C&G - Model ME Series - Vacuum Evaporators

by C&G Depurazione Industriale S.r.l.     based in Rignano S.Arno, ITALY

The ME series of vacuum evaporators have vertical development with the boiling chamber in the lower part and the condensation chamber in the upper part. The vacuum system guarantees minimum energy expenditure. These plants consist of a batteiy of evaporators in series, called 'stages', each of which possesses a heat exchanger. Steam circulates ...

PWTech - Model HBNR - Hybrid Biological Nutrient Removal

by Process Wastewater Technologies LLC     based in Rosedale, NORTH CAROLINA (USA)

The PWTech Hybrid Biological Nutrient Removal (HBNR) process is a widely utilized technology for treating wastewater to a very high standard, particularly when stringent nutrients requirements are in force. Combining the performance advantages of continuous flow aerobic/anoxic reactors and the cost-simplicity benefits of sequencing batch reactors ...

HSM PET - Model CP 4988 - Crusher Press Combination

by HSM GmbH + Co. KG     based in Frickingen, GERMANY

The efficient PET recycling system reduces the volume of empty PET bottles by up to 90% in one cycle and produces compact raw material bales. A dosing shaft ensures that the bottles are drawn in securely and achieves a throughput capacity of up to 4000 (1 litre) bottles every hour. The drainage system discharges all residual fluid before pressing. ...

LAR - Model BioMonitor - Ultimate Online BOD Analyser

by LAR Process Analysers AG     based in Berlin, GERMANY

Measurement range: 1-200.000 mg/l BOD, 0-100 % Toxicity, Respiration in mg O2/l x min. Response time: 3-4 min. (customizable). High degradation. Sludge activity. Using the plant's own biomass. No memory effects.

Environnement S.A. - Model Amesa-M - Sorbent Trap Mercury Sampler (HG)

by Environnement S.A     based in Poissy, FRANCE

Continuous sampling of Mercury (Hg) in CEMS applications.  Automatic and continuous stack mercury sampler. Measuring range (total mercury): 0.001 – 1000 μg/ m³. Meets the US EPA Performances Standard 12 B mentioned in the US Portland Cement Rules and the new MATS (Mercury and Air Toxics Standards).

SmartTrak - Model 140 - Ultra-Low Mass Flow Controllers

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

When you need precision gas mass flow control of expensive process gases, where minimal pressure drop is a key consideration for cost savings an

EZstrip - Model TR - Muncher for Solids Grinding and Sludge Conditioning

by Moyno, Inc.     based in Springfield, OHIO (USA)

The latest addition to the EZstrip family is a range of grinders offering a competitive solution to solids grinding and sludge conditioning. The EZstrip TR Munchers all house the quick release access port allowing the cutter assembly to be maintained in place without removing the equipment, reducing maintenance time.

Need help finding the right suppliers?

Let the XPRTs do the work for you