Equipment in El Salvador

Serving El Salvador | Office in El SalvadorNear El Salvador
83968 Results found
  • Location: Latin America ×

  • Location: El Salvador ×

Memosens - Cutting-edge Sensor System for Liquid Analysis

by Endress Hauser Instruments International AG     based in Reinach, SWITZERLAND

Memosens technology revolutionizes liquid analysis technology. It converts the measured value to a digital signal and transfers it inductively to the transmitter, eliminating the problems associated with moisture and corrosion – the sensors could even be operated under water! With signal alarms in the event of transmission disruption, ...

Proco - Model Style 233/223 - Triple Wide Arch

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

Proco Series 230 Rubber Expansion Joints are designed for piping systems to absorb pipe movements, relieve stress, reduce system noise/vibration, compensate for misalignment/offset and to protect rotating mechanical equipment against start-up surge forces. Proco Style 233 and 233FA: Triple wide-arch product where most movement is needed. Available ...

Genius5 - Model pmctrace - Emissions trading instrument

by Genius5-Instruments GmbH     based in Kottingbrunn, AUSTRIA

2013 01 01: Start of 3rd periode of european emissions trading. Since 2013 01 01 EU regulation 601/2012 is in force. One of the targets of this regulation will be the determination of fossil CO2 by doing emissions measurements. The portion of biogen CO2 is counted with zero.

AlgaeChek - Portable Fluorometer for the Detection of Chlorophyll a or Cyanobacteria

by Modern Water - Monitoring Division     based in Cambridge, UNITED KINGDOM

The portable fluorometer provides a cost effective solution to monitor the effects of organic pollution or identify potentially harmful cyanobacteria. AlgaeChek can be configured to detect either Chlorophyll a, phycoerythrin or phycocyanin. Chlorophyll a provides an indication of the algal biomass and is often used as an indicator water quality ...

Watertrak - Reverse Osmosis (RO) System

by Aquatech International Corporation     based in Canonsburg, PENNSYLVANIA (USA)

Reverse Osmosis (RO) uses a semi-permeable spiral wound element to remove up to 99% of dissolved solids (TDS) and bacteria from the feed water source. A high pressure feed pump forces raw water into thin film membrane layers thus allowing the permeate product water to collect in the center tube of the RO element. Water containing impurities and ...

Hi-GARD™ Gravity Actuated Rotary Distributors

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

Gravity-Actuated Rotary Distributor for distribution of wastewater over trickling filter or biotower media. The unit provides a cost-effective means of distribution with a low-maintenance piece of equipment. Aluminum construction provides corrosion resistance, which results in longevity without the need for repainting. Large non-clogging ...

Tecam - Zeolite Rotor-Concentrator + Regenerative Thermal Oxidizer (RTO)

by Tecam Group     based in Llinars del Vallès, SPAIN

The Zeolite Rotor-Concentrator + Regenerative Thermal Oxidizer unit consists of a Zeolite wheel plus an oxidizer unit right after it. The basic operating principle of the Zeolite Rotor-Concentrator equipment is the Volatile Organic Compound VOC emission treatment by adsorption process. The adsorption takes place using a porous material called ...

Climatronics - Model WE-14 - Wind Resource Anemometer

by Climatronics Corporation     based in Bohemia, NEW YORK (USA)

Climatronics’ WE-14 anemometer (P/N 102836) is specifically designed for measuring the wind speed at potential wind power generating facilities. This anemometer is an ideal direct replacement for the disposable plastic sensors used historically for wind resource assessment.

AEREON Triton - Water Injected Sonic Flares

by AEREON     based in Austin, TEXAS (USA)

Triton sonic flare technology allows for safe, efficient and smokeless flaring at elevated oil and gas production rates by injecting sea water into the flame envelope. High pressure sea water injection reduces flare emissions, helps minimize overall radiation levels from the flame, abates combustion noise, and preserves flame characteristics ...

Need help finding the right suppliers?

Let the XPRTs do the work for you