Equipment in France

88149 Results found
  • Location: Europe ×

  • Location: France ×


Eldan Recycling - M16-2 - ACSR Shear Indispensable Machine

by Eldan Recycling A/S

If you process ACSR Cable or any other similar material, the ACSR Shear M16-2 is an indispensable machine. The ACSR Shear M16-2 provides a safe and effi cient means of reducing long cable lengths in seconds. It is simple to load, it is simple to operate, it is simple to maintain. The ACSR Shear M16-2 offers a very useful and economic way of ...


NEW: AS32M - Analyzer for Quick and Direct (Without Conversion) NO2 Measurement

by Environnement S.A

Designed to alleviate potential disadvantages of the chemiluminiscence method and to provide the most accurate value for NO2 concentration measurements. No chemical conversion required, not sensitive to other nitro-containing species and no Toxic Gas Emissions. Exclusive benefits: “True NO2” measurement (i.e. without conversion), Ultra sensitive, ...


HORIBA - GA-360E Series - Trace Gas Monitor

by HORIBA Europe GmbH

The GA-360E/F360E Series is a line up of units that provide ultrahigh sensitive, highly accurate, continuous monitoring of trace amounts of impurities contained in gases (N2, O2, He, Ar, H2, and Air) used in the semiconductor manufacturing process. Utilizing a cross-modulation method, GA-360E/F360 Series units have no zero drift due to the ...


Pieralisi - GIANT - HS Series - Decanter Centrifuges

by Pieralisi Group

The Pieralisi GIANT HS Series decanter centrifuges provide solutions to all technological problems of solid-liquid and solid-liquid-liquid separation.


Verderflex - Dura 55 - Peristaltic Industrial Hose and Tube Pumps

by Verderflex Peristaltic Pumps - part of the Verder Group

Maximum Flow Rate: 15.3 m³/hr. Maximum Discharge Pressure: 16 Bar. Port Flange: 316 Stainless Steel Universal slotted design fits with DIN PN16, ANSI 150# & JIS10K. Options: 316 Stainless Steel with Polypropylene or P.V.D.F Insert. Maximum Suction Lift: 9.5 mWc. Maximum Solids Content: 13.75mm compressible. 5.5mm smooth incompressible. ...


EUROPELEC - SOFIE - High-performance Submerged Turbine Aerator

by EUROPELEC

The SOFIE is Europelec's high-performance submerged turbine aerator and/or mixer with a vertical shaft and is designed to mix and transfer oxygen in waste water as efficiently as possible. The solidly-built components have been selected to guarantee a long life with a reduced maintenance. The SOFIE consists mainly of stainless steel blades rotor ...


Legras - FMA Waste Moving Floor

by Legras Industries

General features For on or off road use; Transportation of household, trade and industrial waste. Available volumes 87-98 Cv Metres Reinforced body construction with optional additional side reinforcement. Standard rollover sheet with optional manual or hydraulic netting system or sliding roof with loading hatch. 21 plank floor construction with ...


HSM DuoShredder - 5540.2 - Two-Stage Shredder System for Fully Automatic Document Disposal

by HSM GmbH Co. KG

The HSM DuoShredder 5540.2 is a two-stage shredder system for fully automatic document disposal. Depending on the paper quality, loading and downstream systems, it can achieve a throughput of up to 350 kg per hour. In combination with an HSM baling press, you can expand the HSM DuoShredder 5540.2 into a complete disposal system. We recommend the ...


BUCHI - B-811 / B-811 LSV - Extraction System for Large Sample Volumes (Trace Analysis)

by BÜCHI Labortechnik AG

Ensure the most efficient sample preparation for demanding applications in residue and contaminant analysis. Expand your range of application with the multiple extraction methods of the Extraction System B-811.


HORIBA - OCMA-500 - Oil Content Monitor

by HORIBA Europe GmbH

The OCMA-500 Oil Content Monitor has been redesigned for even better operability, maintaining its user-friendly features. After injecting the sample, all you have to do is press a button to get the monitoring operation done quickly, from oil extraction to sample measurement and draining. This machine is easy for anyone to use.The OCMA-500 cuts ...

Need help finding the right suppliers?

Let the XPRTs do the work for you