Equipment in United Arab Emirates

82908 Results found
  • Location: Asia & Middle East ×

  • Location: United Arab Emirates ×


Watertrak - Multi Media Water Filters

by Aquatech International Corporation     based in Canonsburg, PENNSYLVANIA (USA)

A water filter is used to remove suspended solids or turbidity from the water. These are located in front of demineralizer trains, reverse osmosis units, softeners, etc. By removing this debris in the water, it prevents the down stream equipment from being plugged up when operated properly. Watertrak filters offer a wide range of sizes, materials ...


Grundfos - Model BMP - Booster Module Piston Pumps

by Grundfos Pumps Corporation     based in Bjerringbro, DENMARK

Grundfos BMP, piston pumps, are designed for the transfer of liquids under high pressure. The pumps are based on the axial piston principle, enabling a very light and compact design. The BMP is a positive displacement swashplate water pump. The pump is designed to handle industrial tap-water processes. Grundfos BMP pumps offer a total efficiency ...


LG Sonic - Model e-Line - Advanced Treatment Against Algae

by LG Sound B.V.     based in Zoetermeer, NETHERLANDS

The LG Sonic e-line is an advanced underwater system that emits different ultrasonic parameters in order to control algae. Advanced treatment against algae; Chameleon Technology™ to change the ultrasonic program according the type of algae. Possible to treat multiple tanks or water surfaces with curves with one e-box. Integrated ...


TITECH - Model x-tract - Separator with X-ray technology

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

The TITECH x-tract identifies materials irrespective of their surface. With X-ray technology it can separate substances on the basis of their atomic density and is so able to separate material concentrates into differ x-tractent material types.


OCMA - Model 550 - Oil Content Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

OCMA-550 to measure residual oil on components and concentrations of oil adhered on solids such as soil. Measurement can be easily made only by injecting the extracted water sample into the attached cell and setting it to the equipment. This model features a simple design which allows opening/closing of the door to setting of cell with just one ...

Utility Flares

by AEREON     based in Austin, TEXAS (USA)

Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium. Utility flares therefore, do not require auxiliary gas streams such as steam or air; two ...

Model 100 - Continuum Electronic Ignitor System

by AEREON     based in Austin, TEXAS (USA)

The Model 100 Continuum Ignitor utilizes a high voltage electric arc to ignite a combustible air/gas mixture. This arc occurs every 20 seconds for a two second duration (timing is adjustable). The Continuum provides a spark inside a ‘slipstream’ chamber that diverts a portion of the waste gas to create a combustible air/gas mixture. ...

Flame Front Generators (FFG)

by AEREON     based in Austin, TEXAS (USA)

Flame front generators are effective, time proven ignition systems which have been widely used in flaring applications for decades. The inherent reliability, rugged construction, ease of operation, and its economic advantages have allowed the flame front generator (FFG) to remain one of the most popular forms of pilot ignition in the industry. The ...

Chimera Liquid Burner

by AEREON     based in Austin, TEXAS (USA)

The Chimera was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for various onshore applications that require high destruction efficiency of liquid hydrocarbons. When oil is flared, a high pressure media such as an air, gas, or steam is required to mechanically ...

Knockout Drum

by AEREON     based in Austin, TEXAS (USA)

Whenever a process requires that entrained droplets be removed from a vapor stream, a knockout drum should be integrated into the system. Condensation can occur when hot process gases cool considerably in the flare gas header and riser, and some gases also go to dew point at ambient temperatures and pressures and can therefore generate liquids. ...

Need help finding the right suppliers?

Let the XPRTs do the work for you