Equipment in Connecticut

Serving Connecticut | Office in ConnecticutNear Connecticut
101619 Results found
  • Location: USA ×

  • Location: Connecticut ×


Griffin - Hydraulic Power Units

by Griffin Dewatering     based in Houston, TEXAS (USA)

Griffin’s Hydraulic Power Units are available in five standard sizes; 250 Series, 400 Series, 600 Series, 800 Series and 825 Series. These units are self contained, portable, diesel-driven or electric-driven hydraulic power units. These units are capable of powering hydraulic submersible pumps or other hydraulic equipment.


TITECH - Model Finder - High Purity Metal Fractions Separator

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

The TITECH finder is specialized to separate high purity metal fractions from even the most difficult fractions in terms of composition, grain size and mix from mixed waste and metal streams.


Model SPH Series - Polypropylene Plastic Housings

by Shelco Filters     based in Middletown, CONNECTICUT (USA)

Plastic Housings for Economical Applications.

TITECH - Model autosort - Multifunctional Sorting System

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

The TITECH autosort is a multifunctional sorting system to recover a wide range of pieces of material from different waste streams, single stream, packaging, paper, household waste and other sorting tasks looking for enhanced material information and color in combination.

Griffin - Trash Pumps

by Griffin Dewatering     based in Houston, TEXAS (USA)

Griffin's Self Priming Trash Pumps are available in 4' and 6' models standard that do not require additional priming systems. These pumps are wet-priming portable pumps. They operate efficiently under intermittent flow conditions. These pumps are capable of handling high flows and head conditions exceeding 125 ft. The pump includes a suction ...

Griffin Dewatering - Wellpoint Pipe Puller

by Griffin Dewatering     based in Houston, TEXAS (USA)

The Wellpoint Pipe Puller is a “safety breakthrough” as well as an ideal time saving part in the dewatering set up over the conventional methods. The Wellpoint Pipe Puller grabs the inside of the pipe wall below the threaded section of pipe or the joint of PVC pipe, making the removal of the installed wellpoint a quick, simple, and ...

Sewer Bypass Pumping

by Griffin Dewatering     based in Houston, TEXAS (USA)

As our sewer infrastructure continues to age, rehabilitation is needed to keep it up and running. With Griffin's line of trash handling pumps, contractors can bypass sewage during sewer line repairs - getting tough projects done and keeping the system working for the community that relies on it.

Eductor System

by Griffin Dewatering     based in Houston, TEXAS (USA)

Especially suited for deep excavations and stratified soils. As many as 100 eductor wells are commonly activated by a single pumping station although this varies considerably on the volumes of water to be pumped and the lift required. The volumes of water which can be pumped by each system are generally low, typically less than 200 gpm.

Deep Well System

by Griffin Dewatering     based in Houston, TEXAS (USA)

The deep well system is also a versatile predrainage dewatering system which can pump high and low volumes of groundwater. This method is best suited to homogeneous aquifers that extend well below the bottom of the excavation. Deep well systems consist of one or more individual wells, each of which has its own submersible pump at the bottom of the ...

Griffin - Electric Submersible Pumps

by Griffin Dewatering     based in Houston, TEXAS (USA)

Griffin Pump and Equipment Inc. offers a complete line of electric submersible pumps. Whether it is clean water, gray water, or trash laden effluent. Griffin can provide the right pump for your application. 120 Volt, Single Phase, 60 Cycle 230 Volt, Single Phase, 60 Cycle 230 Volt, Three Phase, 60 Cycle 460 Volt, Three Phase, 60 Cycle Other ...

Need help finding the right suppliers?

Let the XPRTs do the work for you