MicroMac 1000 - Portable Single or Multiparameter Colorimetric Analyser

The portability of the analyser gives the user a portable 'laboratory' as it uses the same standard methods methods of analysis as most laboratories. It can be used as a tool for site surveys, investigations or when set up as a package, longer term studies or profiling of a site. With the advantage of 'live' results the system can be used in place of samplers where the sample is collected and sent away for laboratory analysis thus enabling changes to be made much quicker.

The chemistry module employs the patented Loop Flow Analysis System (LFA - Systea Srl) resulting in a very flexible chemistry base which can incorporate high temperature digestion or heating, UV digestion, acid digestion, temperature controlled end point reactions all utilising either a visible light colorimeter or a fluorimeter.

In the same way as the wall mounted monitor, the MicroMac C, the MicroMac 1000 can be configured as a single or multiple chemistry system up to a maximum of 4.

The analytical methods used in the MicroMac 1000 are based on the Standard Methods that are used in Laboratories throughout the world. Many of these methods have their basis in the 'Methods for the Examination of Waters and Associated Materials' as published by HMSO - Standing Committee of Analysts.

The Loop Flow Analysis system can be configured as a single or multiple chemistry module: The multiple chemistry module can have up to 4 chemistries or 7 reagent additions. The multiple chemistry module above shows the inclusion of a high temperature heating bath for hot acid digestion and has high pressure valves and teflon tubing in all areas in contact with the acid or high temperatures.

This site evaluation package allows the user to quickly assess problems that a site is encountering by monitoring 24 hours per day and at weekends. Data from site evaluations has already allowed water company's to identify site process problems and to track down illegal dumping of chemicals into the water course by an unscrupulous manufacturer.

Partech are offering this package for hire in a package that includes the analyser, sample pump, delivery and setup, reagents and data reporting. This package can be tailored to suit the particular needs of a site. Alternatively the MicroMac 1000 Portable analyser can purchased along with its sister product, the MicroMac C which is designed for permanent installation.

• Nutrients
• Ammonia
• Phosphate
• Aluminium
• Iron
• Manganese

• Multichemistry
• Crude Sewage Sampling
• Installation Packages

Physical

Weight 10 kg
Dimensions (hxwxd) 530 x 120 x 350 mm
Enclosure Rating IP55

Environmental Data

Operating Temperature  10 to 30ºC
Location  Indoor or Outdoor

Power Supply

Voltage  115 or 230VAC, +10/-15%, 50/60Hz 12VDC option available
Power Consumption 4W on standby, 10W during analysis

User Interface

Display Graphic LCD, Large Digit Process Variable, Measurment Data, Alarm Messages
Datalogging 400 datapoints
Backlight On/Off/On after keypress with user adjustable contrast
Membrane Keypad Multifunction Panel

Output Signals

Analogue Output 4-20mA, max load 400 ohm per measurement unless otherwise specified
Relays 3, High Alarm, General Fault, Calibration alarm
Relay Type SPDT
Relay Rating 0.5A @ 24VDC
Communication Port RS232, RS485, USB