Model MCP-TP - Multi Process Control Panel Series

The MCP-TP control panel has the ability to monitor multiple processes and remotely control the dual solenoid control valve based on system conditions. The MCP-TP control panel can function as a simple single loop controller (e.g., pressure reducing, flow control, level control to multiple loop controller.)

The MCP-TP reads transmitted signals and energizes the dual solenoid pilots on the Singer control valve. The MCP-TP can react to any change in conditions by monitoring the system continuously and comparing actual process values to desired set-point values.

Optional alarm outputs for SCADA is available.

• Versatility in programming for custom applications
• Flexibility of single or multiple process monitoring
• High performance PLC-based control with P.I.D. optimization
• Capability of remote SCADA 4 – 20 mA or local set-point(s) adjustment
• Precise valve positioning
• Visual status indication
• Robust and self-contained in NEMA 4X rated panel
• Intuitive colour touch screen interface display
• Capable of local control of model 2SC-PCO dual solenoid valves

MCP-TP monitors inlet pressure while filling tank at a relatively steady flow rate. If tank is full, valve closes. If inlet pressure drop below normal, valve will modulate to close to keep inlet pressure from dropping further.

Model (MCP-TP) touch panel screen is a user-friendly operator interface that enables intuitive control and monitoring. Model (MCP-TP) touch panel screen eliminates the need for mechanical push buttons, switches, and indicator lights and readouts. The screen is custom tailored to customer-specific application requirements.
Touch Panel Details

• Dimensions: 7 in / 175 mm W x 5 in / 125 mm L
• Display: 256 Color TFT
• Protection: NEMA 4X rain-tight
• Power Supply: 24 VDC at 240 mA
• Screen can be customized to application

• The multi-process control panel shall be Singer Valve model MCP-TP, powered by 120 VAC to 240 VAC, 50 or 60 Hz source. The Model MCP-TP shall have pre-programmed logic module, adjustments and connection terminals, housed inside NEMA 4X rated rain-tight enclosure.
• The multi-process control panel shall accept SCADA set-point 4 - 20 mA signals and process variable 4 - 20 mA signals. The dual solenoid control valve shall be positioned by the multi-process control panel based on specified system conditions.
• The multi-process control panel shall incorporate a pre-programmed logic controller with P.I.D. optimization and real math calculation for accuracy.
• The multi-process control panel shall have 24 VDC, 1.3 amp auxiliary power supply.
• Dual solenoid control shall be via solid state relays with zero-voltage switching.
• The multi-process control panel shall have a door-mounted color touch screen interface.
• Prior to shipment, the panel shall undergo full function and operational tests.