The new law “Mandatory Greenhouse Gas Reporting” 40 cfr part 98
|MT111 and MT112 - Greenhouse Gas Monitoring And Reporting - Back ...|
|MT111 and MT112 - Greenhouse Gas Monitoring And Reporting - ...|
Subpart C is straight forward, measure your fuel and report using the formula for Tier 1 or 2.If you produce less than 25,000 metric tons per year from their dryer stack and biomethan. Youneed not report. Most plants will produce more that the threshold amount of 25,000 MT/Yr.
Subpart II. If you produce biomethan and if the CH4 is totally captured and destroyed (in thedryer) or flare stack that they only have to monitor flow from the biomethan producer and CH4.
You have two options to measure CH4
Assuming you chose option 2, you have 2 choices.
Bag sampling made easy and low cost, less than your local lab. (Does your local lab knoweverything the EPA rule requires?)
PERMANENT AUTOMATIC WEEKLY SAMPLER AND YEARLY GHG REPORTING
Permanent automatic weekly sampler.
Contact MonitorTech for specific information based on part 98 Mandatory Green House GasMonitoring rules. Learn how and if your company needs to comply, at the lowest possible cost.MonitorTech Corporations is a complete environmental equipment and service company. Wesupply equipment, installation supervision, start-up, training, CGA and RATA audits, reportpreparation and writing and part 98 consulting, and services.
The MT111 here shown next to our MT100 CEMs,. Is designed to work with the MT100 PLC.
The system turns on at any selectable time to col-lect the sample. The part 98 rule requires collec-tion at least once a week.
The MT111 cycle of operation is:
The MT111 continuously collects the flow data from the meth-ane source and directs it to the MT100 PLC.
Both the flow data and methane analysis is displayed on the MT100 HMI screen. Control of the system is accomplished via the HMI screen.
The data using the fuel flow data collected in the MT100, can be calculated at any time. The system can then produce a com-pleted yearly report per the requirements of 40 cfr part 98.
Monitor Tech has the ability to interface with the HMI via dial in or over the web. This allows for remote analysis or software changes from our offices .
The MT112 is designed as a stand alone unit. The MT112 performs the same functions as the MT111 of collection of the methane flow data and analysis of the methane sample.
Additionally the MT112 has an on board PLC that also collects the fuel flow data for complete analysis of the CO2 equilivent emissions.
At any time data can be transferred to a thumb drive and up loaded into any PC. The data can then be cal-culated and the reports completed.
In 40 cfr part 98 “Mandatory Green House Gas Reporting” the EPA has mandated the reporting yearly of green house gases (GHG). The process is fairly simple for many operations. Simply measure your fuel usage and use the formula in the law. HOWEVER, methane gases must be measured on a weekly basis and included in your report.
Do you have a Methoneator? The EPA has determined that that is a waste water source of methane. You must measure and report your methane emissions.
Monitor Tech supplies the bags and boxes; you take the sam-ples.
Monitor Tech pre-labels the boxes for UPS delivery. The bags are given a unique serial number. Simply fill the bag. Fill out the chain of custody form and ship.
Monitor Tech will do theanalysis and e-mail you the results.
Each month we will ship you a supply of bags and boxes.