- Specific Vapor Analyzers

0.511.522.533.544.55 (0 votes)
InfraRan - Specific Vapor Analyzers

Fast Response, Low Maintenance, Economical Monitoring, Lightweight & Portable, Easy to Use


The InfraRan Specific Vapor Analyzer is a single-beam, factory-calibrated, infrared photometer designed specifically for easy, on-site ambient air measurements of a specific gas or gases. The gas or gases to be measured and their respective concentration ranges must be specified at the time of purchase.  This easy-to-use portable analyzer is ideal for measuring single or multiple anesthetic gases, SF6 for ASHRAE 110 evaluations or leak detection, single or multiple refrigerant gases, various solvent vapors, as well as numerous other infrared absorbing gases. The analyzer's user-friendly software prompts the operator through the analysis and real-time concentration levels are displayed in either parts per million (ppm) or percent (%) depending on the calibration range. The InfraRan Analyzer provides a reliable, maintenance-free method for dedicated measurement of a particular gas or gases.

Typical Gases

  • Acetone
  • Carbon Dioxide (absolute)
  • Carbon Monoxide
  • Carbon Tetrachloride
  • Desflurane
  • General Hydrocarbons (Hexane)
  • Isoflurane
  • Isopropyl Alcohol
  • Methylene Chloride
  • Nitrous Oxide
  • Perchloroethylene
  • R 114
  • R 12
  • R 134A
  • R 236 fa
  • Sevoflurane
  • Sulfur Hexaflouride (SF6)
  • Toluene (Low)

Principle of Operation
The InfraRan Specific Vapor Analyzer is a single-beam infrared photometer designed specifically for easy, on-site ambient air measurements of a particular gas or gases. The analyzer can be purchased to measure 1 or 2 chosen gases provided they have an infrared absorption band in the infrared region from 2.5 - 14 µm. Infrared absorption filter photometry is used to measure gas concentration.

An integral sample pump draws a gas sample into an optical transmission cell where it absorbs energy from an infrared beam. A filter and detector convert the infrared intensity, at the wavelength selected by the filter, to an electronic signal. An embedded microprocessor converts the reduction in beam intensity to a concentration of the target gas and this is displayed in appropriate units (typically ppm or percent).

Fast Response
Response to 90% is less than 10 seconds with a stable maximum concentration in less than 30 seconds. Since the air sample is continuously delivered to the cell by means of a built-in sampling pump, the analyzer outputs real-time concentration data, allowing personnel to be alerted to potential hazards before they become serious.

Low Maintenance
The InfraRan Specific Vapor Analyzer provides a reliable , maintenanc-free method for dedicated monitoring of a specific gas or vapor. Its design combines a hardware/electronic/software package with a measurement principle that can be easily applied to meet a variety of application needs. The analyzer does not require the use of any consumable items other than zero gas and particulate filters, which eliminates the need for purchasing a large quantity of other supplies to keep the InfraRan Analyzer operable.

Economical Monitoring
The analyzer uses a nondestructive measuring principle and only requires a source of power for operation (internal battery pack or external operating supply - 120-220 VAC, 50/60 Hz). Since the analyzer is factory calibrated for one specific vapor or multiple gases (depending on the model selected), recalibration by a trained technician is not required for most applications. With its menu-driven software, direct-reading display, and simple controls, minimal - if any - training is required to operate the analyzer. Thus, monitoring costs with the InfraRan Specific Vapor Analyzer are very low compared to other analytical methods or instrumentation.

Lightweight & Portable
The analyzer weighs 18 lbs. With its internal battery power, the InfraRan Analyzer is truly a portable instrument. It can run up to 8 hours on its battery pack, and includes internal data logging for added measurement and record keeping convenience. No additional equipment is necessary since all supplies that are required for monitoring are included. The InfraRan Specific Vapor Analyzer can be factory-calibrated for most compounds that have an infrared absorption band in the 2.5 µm - 14.5 µm region.

The compound and concentration range must be specified at the time of purchase. Standard multiple gas models are available for measuring refrigerant or anesthetic gases.

Easy to Use
The InfraRan Specific Vapor Analyzer is factory-calibrated so that no chemical standards are needed by the user to calibrate the analyzer. It's user-friendly, menu-driven software and easy-to-read display prompt the user through all aspects of the analysis - enabling both non-technical personnel, as well as those with an infrared gas analysis background, to make fast, accurate measurements.

Wilks - A Spectro Scientific Company
Wilks - A Spectro Scientific Company
25 Van Zant Street, Suite 8F
East Norwalk ,  CT 06855


Add Your Customer Review

0 Reviews

No reviews were found for InfraRan - Specific Vapor Analyzers. Be the first to review!

Environmental XPRT is part of XPRT Media All Rights Reserved