bore hole maintenance Equipment

7 Results found
  • Category: Soil & Groundwater ×

  • Subcategory: Boreholes ×

  • Keyword: bore hole maintenance ×

Raise Boring Tools and Systems

by Sandvik Mining     based in Amsterdam, NETHERLANDS

Sandvik raise-boring heads optimize the performance of the boring machine by having high penetration rates, great stability, low vibration and low torque demands. Together with our high-performance pilot bits, they enable shafts and holes from 0.66 to 6.0 meters in diameter to be bored to depths (or lengths) of up to 1000 meters quickly, ...

Groundwater Pumps

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

Groundwater pumps are useally applied for developing and purging monitoring wells before executing a sampling procedure. Various standard sets are available for purging and sampling monitoring wells to a depth of 20 to 90 m.

Soil Sampling and Classification Set, Standard Set for Investigations Down to a Depth of 2 Meter

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

Soil research is a very important aspect in the planning and execution of agricultural- as well as civil engineering and operations. In order to make the soil research as comprehensive as possible the following studies must be made with regards to: The build up of a soil; i.e. determining the composition, the thickness and the position of the ...

Model MTM/N10 - Miniature Depth and Level Pressure Sensor

by Dynotek Fluid Data Management     based in Arvada, COLORADO (USA)

The MTM/N10 depth and level pressure sensor is available for applications where space is very limited. The housing diameter of 0.39 inches offers the user an ideal high performance level measurement in small diameter, i.e. 1/2“ monitoring wells, stand pipes and bore holes. The stainless steel construction and integral polyurethane cable ...

Domestic Ground Source Heat Pumps

by Ardenham Energy Limited     based in Bierton, UNITED KINGDOM

The sun radiates energy on the earth’s surface. Dig one metre down, and the ground is a thermal store from which we can extract free energy. When we install a ground source heat pump, we lay loops of pipes in the ground, or we place them in a bore hole up to 200m deep. The pipes contain a liquid which absorbs the ground heat, however it is ...

LORENTZ - Model PS150C - Solar Water Pumping Systems

by GenPro Energy Solutions     based in Piedmont, SOUTH DAKOTA (USA)

The LORENTZ PS150 Centric is designed to lift water from shallow water sources such as bore hole, pond, spring box and dug out applications. It has the capacity of producing 1,260 U.S. gallons per hour or in a solar day (5 to 6 hours), approximately 7560 U.S. gallons.The system design incorporates one of the most efficient solar power technologies ...

Versa - Model V-50GTRX - Drill

by Laibe Corporation     based in Indianapolis, INDIANA (USA)

Mounting: Rubber track all-terrain carrier, IHI-70 (224HP). Hydraulics: Two axial piston hydrastatic pumps power the vehicle tracks and tophead or mud pump mud independently. An axial piston load sense pump powers the feed, winch, auxiliary and set-up functions. A cast iron gear pump provides the charge pressure and flow to circulate fresh oil ...

Related Terms for bore hole maintenance

Need help finding the right suppliers?

Let the XPRTs do the work for you