Geogrids Equipment in Ontario

35 Results found
  • Category: Soil & Groundwater ×

  • Subcategory: Geogrids ×

  • Location: Canada ×

  • Location: Ontario ×

Geogrids

by Geopool Engineering Materials Co.,Ltd

Steel-Plastic Biaxial Geogrid Made from steel-plastic reinforced belt , our compositegeogrid is known for its superior tensile strength , strong bearing capacity ,large coefficient of friction , excellent frost and erosion resistance . Except the traditional applications of geogrid , it has been widely used in subsea projects & sea ...

Fornit - Biaxial Geogrids

by Erosion Control Forum

When you're constructing paved roads, nothing offers support like Fornit biaxial geogrids.

Model PP - Biaxial Geogrid

by Taian Modern Plastic Co., Ltd.

Introduction: TMP Biaxial Geogrid is manufactured from Polypropylene. It is produced through the process of extruding, punching, heating, longitudinal stretching and transverse stretching.

Reinforcement

by FRANK GMBH

Constructions have to rely on the stability of the subsoild - but in most cases it is not as good as it should be. Geosynthetics are a good and easy-to-use alternative. For example sound barriers have to be built very steep. because there is not enough space between the road and the buildings. Often the only possibility is a reinforded wall. The ...

Geogrids

by Granite Environmental, Inc

Granite geogrids are engineered meshes that are typically made up of a regular pattern of fairly rigid types of plastic. These nets or meshes are used to strengthen fill materials in geotechnical applications. They are designed specifically to reinforce, and permit heavy construction on sites with weak soils, eliminating most other foundation ...

Model GGR - Geogrids For Reinforcement

by ATARFIL Geomembranes

Polymeric structure consisting of bundles of fibers or strips arranged in an open regular structure, protected or not against corrosion. Commonly used for applications of reinforcement and consolidation of soils, Geogrids are manufactured by extrusion, bonding, weaving or welding processes, which results in different types of interlacing.

CeTeau - Segmental Reinforced Block Wall

by CeTeau B.V.

CeTeau segmental reinforced blocks wall, Economical, Flexible, Durable, Easy to install, and aesthetically pleasing. Our block walls are gravity retaining walls consisting of concrete masonry units, which are placed without the use of mortar (dry stacked), and which rely on a combination of the mechanical tongue and groove interlock, mass and ...

Biaxial (BX) Geogrids

by Nilex

Biaxial Geogrids improve the structural integrity of roadways by confining and distributing load forces. Geogrids provide support for the construction of access roads, highways and applications on weak subgrades that previously required expensive over-excavating and replacing. Geogrids are also used for road construction on stable subgrades to ...

Model RX Series - Biaxial Geogrid (PP)

by Layfield Geosynthetics & Industrial Fabrics

Biaxial polypropylene geogrids are used in base reinforcement applications such as roads, storage yards and parking lots or any other load bearing structure. Biaxial polypropylene geogrids provide good tensile strength in both principle directions. The reinforcing action of RX geogrids lies mainly in increasing the shearing resistance ...

GridPro - Model UXP11W - Biaxial Geogrids for Base and Subgrade Reinforcement

by Propex Operating Company, LLC

GRIDPRO™ UXP11W is a punched and drawn geogrid containing high density polyethylene that is integrally formed into a uniaxial geogrid. GRIDPRO UXP11W will meet the following Minimum Average Roll Values (MARV) when tested in accordance with the methods listed below. These characteristics make GRIDPRO UXP11W ideal for the construction of ...

Need help finding the right suppliers?

Let the XPRTs do the work for you