Geology Equipment

88 Results found
  • Category: Soil & Groundwater ×

  • Subcategory: Geology ×

SEMCO - Model FV Series - Fresh Air Ventilator

by SEMCO LLC     based in Columbia, MONTANA (USA)

The SEMCO FV (Fresh Air Ventilator) Series of outdoor air pre-conditioners have been specifically designed to reduce the energy required to heat or cool outdoor air by up to 80 percent. The FV pre-conditioner allows the HVAC system to effectively and economically accommodate the three-to-four-fold increase in outdoor air quantities, which is ...

Model BX-650 - Box Corer for Marine Geological Sampling

by Ocean Instruments, Inc.     based in San Diego, CALIFORNIA (USA)

The MK-III Corer is constructed of mild steel and is covered with an inorganic zinc compound and an epoxy primer and overcoat to protect against rust and corrosion. The unit holds a 0.25m2 stainless steel sample box (50cm x 50 cm) and has a maximum penetration of 60 cm. Special features include: automatic door closing device, pretrip preventer bar ...

Unconventional Gases - Shale Gas, Tar Sand, and Syngas

by Innovative Environmental Technologies Pvt. Ltd. (IETL)     based in Pune, INDIA

Unconventional gas refers to natural gas resources trapped in coals, shale, Coal Bed Methane (CBM), and tight sands. These resources differ markedly from conventional gas reservoirs in that they are diffuse, continuous accumulations of natural gas. Hydrogen sulfide gas occurs naturally in conventional as well as unconventional gas.Hydrogen sulfide ...

Model 777-A - Water Leak Detector

by Goldak, Inc,     based in Sylmar, CALIFORNIA (USA)

The Model 777-A leak detector is a light, durable, sensitive instrument which will quickly provide accurate leak locations and eliminate false indications and “dry” holes. In the design of the Model 777-A careful consideration has been given to the sounds, frequencies, and  critical characteristics of underground water leaks. The ...

Mobile Evaporator

by General Electric     based in Fairfield, CONNECTICUT (USA)

Treat shale gas flowback and produced water at the well site. Designed to enable on site flowback and produced water recycling, GE’s completely mobilized evaporator reduces the volume of wastewater and fresh water that needs to be hauled to and from the site. This significantly decreases transportation and disposal costs while communities ...

High Density Polyethylene Liners (HDPE) Liners

by Agru Ireland Ltd. T/A Lining Tech     based in Tramore, IRELAND

High Density Polyethylene Liners are available in thicknesses from 0.7mm to 2.5mm and are produced with either smooth or textured surfaces. HDPE geomembranes are fusion welded together to produce a geomembrane lining system which can provide a complete seal against even the most toxic substances. Typical applications for HDPE geomembranes include ...

GISCO - Model SM-20 - Magnetic Susceptibility Meter

by Geophysical Instrument Supply Co. (GISCO)     based in Minneapolis, MINNESOTA (USA)

The SM-20 magnetic susceptibility meter serves a number of geological and geophysical applications where the unique sensitivity of 10^-6 Si units together with its small shirt-pocket size and light weight are appreciated.

Sub-Surface Grab Sampler

by Forestry Suppliers, Inc.     based in Jackson, MISSISSIPPI (USA)

Collect liquid samples without physically entering potentially dangerous sites! The Grab II Sampler is made of high strength aluminum tubing with polypropylene head and telescopic pole. Attaches to a large mouth 1,000 ml borosilicate glass bottle with Teflon-lined cap.

Tornado - Sub-Surface Aerators / Mixers

by RWL Water Aeromix     based in Minneapolis, MINNESOTA (USA)

The TORNADO family of Sub-Surface Aerators delivers excellent oxygen transfer and high mixing efficiency to a wide range of wastewater treatment processes in any climate. From extended aeration to activated sludge to lagoons and oxidation ditch applications, the TORNADO aerator's rugged but efficient design maximizes treatment performance while ...

Model 610 - Box Corer for Marine Geological Sampling

by Ocean Instruments, Inc.     based in San Diego, CALIFORNIA (USA)

The BX-610 Box Corer is constructed of mild steel and is covered with an inorganic zinc compound and an epoxy primer and overcoat to protect against rust and corrosion. The unit holds a 0.062 m2 stainless steel sample box (20cm x 30 cm) and has a maximum penetration of 60 cm. Special features include: automatic door closing device, pretrip ...

Need help finding the right suppliers?

Let the XPRTs do the work for you