direct push Equipment

64 Results found
  • Category: Soil & Groundwater ×

  • Subcategory: Groundwater Drilling ×

  • Keyword: direct push ×

AMS PowerProbe - Model 9110-LAP and 9110-Power - Portable Direct Push Rig

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

The AMS PowerProbe 9100-P is a portable direct push rig, designed for use in confined spaces or buildings where a vehicle-mounted probe cannot go. This model can be driven off any standard AMS PowerProbeª with an auxiliary hydraulic hook-up kit, or the optional AMS portable hydraulic power unit. The 9100-P comes standard with a 50 ft-lb ...

Model 7822DT - Geoprobe Unit

by Rig Source, Inc. (RSI)     based in Elburn, ILLINOIS (USA)

78 inch (1,981 mm) probe cylinder stroke48,000 lb (214kN) pullbackNew GH64 Hammer with Modular Percussion Power Cell and integrated two-speed, bi-directional rotationGA 4000 AugerheadRedesigned control panelPowered by a four-cylinder, 57 Hp, liquid-cooled Tier 3 compliant Kubota turbo diesel engine

Model 6620DT - Probe Cylinder Stroke

by Rig Source, Inc. (RSI)     based in Elburn, ILLINOIS (USA)

66 in. (1676 mm) probe cylinder stroke allows use of 60 in. (1,524 mm) probe rodsOver 20 ton pulling capacity for today's larger sampling tools and deeper depthsEquipped with the powerful GH62 hammerHeavy Duty Undercarriage has a wider track that carries more weight, adds more torque, reduces ground pressure and handles greater tool weightWireless ...

Geoprobe - Model 7822DT - Direct Push Unit

by S2C2 Inc.     based in Raritan, NEW JERSEY (USA)

Geoprobe 7822DT track unit offers 36,000lbs of down force and 48,000lbs of retraction force in a unit that is track mounted and only 60' wide. The rig is capable of advancing 2.25' and 3.25' tooling to greater depths and has much improved auger capabilities. Overall the 7822DT has approximately 30% more power than the 6000 series units. Height ...

Geoprobe - Model 6620DT - Direct Push Unit

by S2C2 Inc.     based in Raritan, NEW JERSEY (USA)

Geoprobe 6620DT track unit offers 35,000lbs of down force and 47,000lbs of retraction force in a unit that is track mounted and only 60' wide. Height requirements for the 6620DT are 153', making the 6620DT extremely useful for accessing limited access areas without giving up the ability to drive the larger tooling to deeper depths. This unit ...

Geoprobe - Model 6600 - Direct Push Unit

by S2C2 Inc.     based in Raritan, NEW JERSEY (USA)

Geoprobe 6600 truck unit offers 35,000lbs of down force and 47,000lbs of retraction force in a unit mounted within a PC-111 box on a F-550 4X4 truck. This unit offers the power of the Geoprobe 6000 series units with a large amount of storage for supplies, pumps etc. This unit pushed a MIP probe to 100' on September 29th 2010.

Geoprob - Model 6610DT - Compact Size Direct Push Machine

by Geoprobe Systems     based in Salina, KANSAS (USA)

The compact size of the Model 6610DT direct push machine gets you in to confined spaces to get the work done.  Because the weight of the unit is evenly distributed over both tracks, the Model 6610DT can easily maneuver through shallow water, soft sands, or muddy fields.  But its convenient structure doesn't sacrifice strength... the ...

The Drive-Point Profiler - Model 660 - Accurate Site Characterization and Site Assessment Profiling Tool

by Solinst Canada Ltd.     based in Georgetown, ONTARIO (CANADA)

The Model 660 Profiler is designed to collect samples from multiple points in a single drive/drilling location, at discrete zones. It allows contaminant vs. depth profiling and detailed plume delineation. The profiler has a 1.75' (45 cm) dia. AW stainless steel tip with one row of screened inlet holes set circumferentially; holes lead to single ...

Geoprob - Model 6622CPT - DI Platform Machine

by Geoprobe Systems     based in Salina, KANSAS (USA)

The compactness of the machine and its light weight make it convenient to mobilize to project sites. Larger pads on outriggers provide increased support when pulling tools in soft conditions. The newly designed, easy-to-use control panel gives the operator timely useful feedback.

Standpipe Piezometer - Model 601 - PVC Well Points

by Solinst Canada Ltd.     based in Georgetown, ONTARIO (CANADA)

Standpipe Piezometers are designed to be placed within a drilled hole to provide a filtered inlet point. Pointed PVC tip is also suitable for pushing into very loose sands at the base of a borehole, a stream, or into very loose tailings pond sediments. Excellent for metals sampling, water level monitoring, permeability measurements, de-watering ...

Need help finding the right suppliers?

Let the XPRTs do the work for you