piezometers
Category: Soil & Groundwater ×
Subcategory: Groundwater Monitoring ×
Keyword: piezometers ×
Location: Latin America ×
Location: Haiti ×
Select the suppliers you wish to contact using the checkboxes.
The Casagrande Standpipe Piezometer measures pore water pressures and water levels in a simple and cost effective manner.
The Model 4500 Standard Piezometer is designed to measure fluid pressures such as ground water elevations and pore pressures when buried directly in embankments, fills, etc. Also for installation inside boreholes, observation wells and standard (>19 mm diameter) piezometer riser pipe. The Model 4500AL is designed for low-pressure ranges. The ...
The piezometer is easy to install and samples can be taken from various depths depending on soil conditions and the drive technology used. Optional stainless steel drive-point extensions are available to achieve desired sampling depths and the optional manual slide hammer can be used for driving the stainless steel piezometers into the ground.
BAT Piezometer is an innovative and proven technology for pore pressure measurements, which has been on the market for more than twenty years. Through the years BAT has gained a lot of experience within the field of pore pressure measurements, which we share with our clients to determine the best instrumentation to meet the specific needs for ...
The Model 102 Water Level Meter has been designed for measuring groundwater levels, especially in small diameter tubes and piezometers. The cable has a heavy duty jacket and stainless steel inner conductor for strength. For situations where highly accurate measurements or speed of reading is more important the Model 101 Flat Tape Water Level Meter ...
The High Flow System is designed to be used in 2 inch wells or larger where a high pumping rate is desired or where very deep wells are encountered. This system is also an excellent well development tool in 2 inch piezometers. Consisting of a High Flow valve, either the 1.25' OD, acetal plastic D-32 or the stainless steel SS-32 and a length of 1' ...
The Low Flow System is designed to be used in small diameter piezometers (usually 1.5' ID to 0.75' ID). It can provide flow rates of up to 1/2 gallon per minute and can lift water from up to 100 feet. This system consists of a low flow valve, either the acetal plastic D-13 foot valve or the stainless steel SS-13 foot valve and HDPE, LDPE or FEP ...
Borehole Packers are suitable for a wide variety of applications in open or cased holes. Uses include permeability testing, monitor well sampling, packer piezometers, hydro-fracturing of formations, sealing artesian flows in open or cased boreholes and pressure grouting.
The Hawk RT is a ruggedised multi-channel data logger with in-built GSM/GPRS communications. Options are available for upto 4 analogue 4-20ma inputs and 6 digital pulse-count/frequency inputs, with options also available for 0-5 mV sensors and thermistor inputs. With an IP67 rating, it ensures maximum protection against hostile environments such ...
Conductivity measurements can be used to characterize water quality changes relative to a baseline or to estimate the concentration of contaminants. The In-Situ Aqua TROLL 100 and Aqua TROLL 200 instruments measure and log conductivity and temperature. For added flexibility, the Aqua TROLL 200 also measures and records water level/pressure. The ...
