Sediment Control Equipment in Syria

Served | Office inNear
200 Results found
  • Category: Soil & Groundwater ×

  • Subcategory: Sediment Control ×

  • Location: Asia & Middle East ×

  • Location: Syria ×

Sediment and Media Filtration

by Global Water Services     based in Lisbon, IOWA (USA)

System Sizing, Design, and Consulting. Diagnostics, Maintenance Contracts, Reloading media. Valve and Controller Replacement and Refurbishing.

Erosion & Sediment Control Equipment

by Weaver Acquisition llc     based in Twinsburg, OHIO (USA)

We are committed to having the best maintained fleet of any erosion & sediment control provider in the Marcellus and Utica.Allow for efficient on-site manufacture and installation of Filtrexx® compost filter sock on the most rugged terrain.Installation rate typically 2.5x-3.0x faster than that of other installers using standard blower ...

Sediment Traps

by Weaver Acquisition llc     based in Twinsburg, OHIO (USA)

Sediment traps are small impoundments that allow sediment to settle prior to discharge into streams, lakes, drainage systems and surrounding areas.  Sediment traps are commonly used at the outlets of storm water diversion structures, channels, slope drains and construction sites.

Circular Sedimentation Tanks Scrapers

by HYDROTECH Water and Environmental Engineering     based in Limassol, CYPRUS

For circular sedimentation tanks HYDROTECH manufactures scraping equipment - travelling bridges from different materials according to requirements of customer. Lightweight design of the bridge and the possibility of changing the speed of rotation present an advantage compared to similar devices from other companies.

Aslan - Water Filter Cartridges

by Aslan Technologies     based in Burlington, ONTARIO (CANADA)

Selection of filter cartridges is a balancing act between what needs to be filtered out versus the required flow rate. The finer the filtration the lower the flow. Equally important is how often you need to be changing out the filters. Most of them cannot be cleaned so you want the longest service interval possible yet still have a working filter.

Model BX-650 - Box Corer for Marine Geological Sampling

by Ocean Instruments, Inc.     based in San Diego, CALIFORNIA (USA)

The MK-III Corer is constructed of mild steel and is covered with an inorganic zinc compound and an epoxy primer and overcoat to protect against rust and corrosion. The unit holds a 0.25m2 stainless steel sample box (50cm x 50 cm) and has a maximum penetration of 60 cm. Special features include: automatic door closing device, pretrip preventer bar ...

Model 97120 - Sediment Trap

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Biogas 97120 Sediment Trap is designed to drop out sediment and condensate from 'wet' gas immediately downstream from the digester. This protects downstream equipment from corrosion, blockage and water hammer to keep the gas train running for years with low pressure drop.

PST - Sediment Separator

by Plåt & Spiralteknik     based in Torsås, SWEDEN

The PST Sediment separator is an efficient equipment for separating solid, non-liquid particles suspended in liquids. The product is mainly used in paper industries, sewage treatment plants and similar and are available in standard sizes from Ø200 to Ø360. 

KC - Model O.D. 80 or 110 mm - Sediment Trap

by KC-Denmark A/S     based in Silkeborg, DENMARK

General: The construction of the sediment trap array ensures a permantly vertical position of the sampling tubes during deployment. The steering fin (optional) and the pivot joints force the array to be held at right angle to the current.

KC - Model HAPS - Bottom Corer

by KC-Denmark A/S     based in Silkeborg, DENMARK

Application: The KC HAPS Bottom corer is highly suitable for taking well defined, undisturbed samples from hard as well as soft sediments. This can be seen by a clear water phase above the sediment surface. It's weight of 168 kg (maximum load) demands winch operation.

Need help finding the right suppliers?

Let the XPRTs do the work for you