subsurface remediation Equipment

19 Results found
  • Category: Soil & Groundwater ×

  • Subcategory: Site Remediation ×

  • Keyword: subsurface remediation ×

Anguil - Off-Gas Treatment Systems

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Thermal and catalytic oxidizers are one of the primary vapor treatment technologies used in purifying harmful compounds from contaminated groundwater or soil.  Global Technologies is the remediation division of Anguil Environmental Systems focused on treating emissions that are extracted from below the earths' surface.  Formed shortly ...

MicroBlower - Subsurface remediation tool

by Tersus Environmental, LLC     based in Cheyenne, WYOMING (USA)

MicroBlower uses a small, low power vacuum blower to extract or inject gases into the subsurface for characterization or remediation. While similar in design to an active soil vapor extraction (ASVE) blower, the MicroBlower is a low-cost alternative designed to run on renewable sources of energy such as solar and wind energy to treat volatile ...

ESD - Subsurface Depressurization Systems

by ESD Waste2Water, Inc.     based in Ocala, FLORIDA (USA)

The ESD Manufactured Subsurface Depressurization Systems are used to place a small vacuum beneath the foundation of a building, extract volatile organic vapors and minimize the potential for harmful vapors entering the building. The ESD Waste2Water, Inc Soil Vapor Mitigation Systems are designed to require minimal maintenance with a quiet ...

RemOx L ISCO - Reagents

by Carus Corporation     based in Peru, ILLINOIS (USA)

RemOx L ISCO reagents, our global brand of sodium permanganate, is a versatile oxidant used for soil and groundwater treatment. Carus provides a certificate of analysis with each shipment to document trace metals present in our product. Permanganate is a single component that does not require activation or pH adjustment and is considered the ...

Biojet - Subsurface Waterjet

by Solutions-IES     based in Raleigh, NORTH CAROLINA (USA)

BioJet is a subsurface waterjet technology engineered to deliver a slow release hydrogen donor for effective in situ bioremediation in low permeability (low K) soils.  BioJet™ provides a solution for one of the most difficult challenges of environmental remediation – residual contamination in low permeability clays and ...

Surfactant-Enhanced Product Recovery

by VeruTEK Technologies, Inc.     based in South Windsor,, CONNECTICUT (USA)

Surfactant Enhanced Product Recovery (SEPR) is one of VeruTEK Technologies’ innovative, Green Chemistry-based technologies for remediation of recalcitrant environmental contaminants, including non-aqueous phase liquids (NAPL) associated with gas works coal tar and creosote oil. SEPR combines VeruTEK’s patented, plant-based & ...

IEG - Vacuum Liquid Recovery System

by IEG Technologies UK Ltd     based in Bedfordshire, UNITED KINGDOM

IEG’s Vacuum-Enhanced Liquid Recovery (IEG VLR) process is an innovative technology underpinned by a detailed knowledge of how hydrocarbons actually behave in the subsurface.  Using IEG VLR maximum recovery of free-phase product floating on top of the groundwater can be achieved quickly and cost effectively using a specially adapted ...

Multi-Phase Extraction Remediation Systems

by Specialty Systems Integrators, Inc.     based in Plymouth, MINNESOTA (USA)

SSI’s Multi-Phase Extraction systems are available in a wide range of configurations. The Multi-Phase Phase Extraction process involves the simultaneous subsurface removal of air, water, and product and therefore each system is designed to meet site specific needs. System component selection is dependant upon expected operating vacuum level and ...

PulseOx - Advanced Remediation

by APTwater Inc     based in Long Beach, CALIFORNIA (USA)

The PulseOx system is based on patented ozone + hydrogen peroxide sparge technology that produces Advanced Oxidation Process (AOP) chemistry directly in the subsurface. This powerful hydroxyl radical oxidation chemistry rapidly oxidizes a wide range of groundwater contaminants.

Klozur - Persulfate Oxidant for In Situ Chemical Oxidation

by PeroxyChem (formerly FMC Corporation)     based in Philadelphia, PENNSYLVANIA (USA)

Klozur persulfate is the oxidant of choice for in situ chemical oxidation (ISCO), because of its ability to treat a wide range of contaminants including chlorinated solvents, petroleum and PAHs. When properly activated, Klozur persulfate provides an unmatched combination of oxidative power and control that can be delivered both safely and cost ...

Need help finding the right suppliers?

Let the XPRTs do the work for you