cone penetration testing Equipment

38 Results found
  • Category: Soil & Groundwater ×

  • Subcategory: Soil Sampling ×

  • Keyword: cone penetration testing ×

Cone Penetration Testing (CPT) Tests

by Pagani Geotechnical Equipment s.r.l.

The CPT test (mechanical type) is essentially the extent of resistance to opening up a bit of size and mechanical characteristics standardized, stuck in a land-speed constant (2 cm / sec). In Cone Penetration Testing, with the Begemann Mechanical Cone, the Qc (tip resistance) and RL (side friction) values are measured with a load cell and ...

Model K19500 - Penetrometer

by Koehler Instrument Company Inc

Penetration tests are performed on petroleum products to determine consistency and shear stability (lubricating greases) for design, quality control and identification purposes. A standard cone or needle is released from a penetrometer and allowed to drop freely into the sample for 5 seconds (or a different specified interval) at constant ...

AMS - Dynamic Cone Penetrometer

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)

The most widely accepted, portable method for evaluating strength and density of soil, in situ. The dynamic cone penetrometer uses a 15 lb. (6.8 kg) drive mass falling 20 in. (50.8 cm) that strikes the anvil to cause penetration of 1.5 in (3.8 cm) diameter cone (45 degree vertex angle) that has been seated in the bottom of a pre-augered hole. The ...

Dynamic Cone Penetrometer (DCP)

by Durham Geo Enterprises

The original Dynamic Cone Penetrometer (DCP) was developed in 1959 by the late Professor George F. Sowers. The DCP uses a 15 lb (6.8 kg) steel mass falling 20 in (50.8 cm) that strikes the anvil to cause penetration of a 1.5 in (3.8 cm) diameter cone (45° vertex angle) that has been seated in the bottom of a hand augered hole. The blows ...

Cone Penetration Test (CPT)

by Zebra Environmental Corporation

The cone penetration test (CPT) is an in situ testing method used to determine the geotechnical engineering properties of soils and delineating soil stratigraphy. The test method consists of pushing an instrumented cone tip first into the ground at a controlled rate (usually 2 centimeters/second). The resolution of the CPT in delineating ...

Vertek ARA - Handheld & Automated Dynamic Cone Penetrometer Systems (ADCP)

by Vertek Cone Penetration Test Equipment

We offer an extensive line of DCP & ADCP products to meet your specific needs. We feature both Single and Dual-mass Hammers, Disposable Cones, Data Collection Systems and several models of Automated DCP. We also offer Soil Moisture Measuring & Resistivity (Conductivity) Probes. We offer custom DCP and ADCP solutions for both the Government ...

Model HM-320 - Universal Penetrometers

by Gilson Company, Inc.

The Universal Penetrometer tests a wide variety of materials by penetration of weighted needles or cones. Main applications are for bituminous materials, but waxes, greases, foods, and pharmaceuticals are among other products tested. Penetration is read from a 5in (127mm) diameter indicator dial of 400 divisions, each representing 0.1mm of ...

CPTU Tests

by Pagani Geotechnical Equipment s.r.l.

Thanks to the piezocone (electrical cone), the data obtained with a static penetration test have been considerably improved in term of measurement precision and data sample rate. Using the Pagani Piezocone for the CPTU test it is possible to acquire, with a continuos pushing, the qc (tip resistence) and the fs (lateral friction) every centimeter ...

Vertek - Model S4 - 20 Ton Cone Penetrometer Push System for Skid Steers

by Vertek Cone Penetration Test Equipment

The S4 Push System Ensures Simple, Affordable Entry into the CPT Market. Increase your revenue opportunities and see ROI in about 40 days. Have you been thinking about the expanding into CPT, but are concerned about cost or complexity? Vertek’s S4 CPT Push System and highly experienced staff can get you into the market quickly and ...

Vertek - Digital Electronic 10 cm² Cone

by Vertek Cone Penetration Test Equipment

The digital electronic 10 cm2 cone is designed to address the accuracy, sensitivity and durability problems inherent in other cone designs of the same or lower capacity. This cone provides excellent data for softer materials and provides excellent resolution in most materials. This cone has a 10 square centimeter tip. The cone consists of two ...

Need help finding the right suppliers?

Let the XPRTs do the work for you