Water Wells Equipment

2014 Results found
  • Category: Soil & Groundwater ×

  • Subcategory: Water Wells ×

Shallow Well Sampler

by GeoPump, Inc.     based in Medina, NEW YORK (USA)

The Model 5750 Shallow Well Sampler is a portable, peristaltic pump with a maximum lift capability of 26feet. This pump is ideal for purging shallow monitoring wells, cleaning GeoPump bladder pumps and tubingassemblies and a variety of applications where it is necessary to move small volumes of liquid. The medical grade silicone tubing is the only ...

Well Purging / Development Pumps

by GeoPump, Inc.     based in Medina, NEW YORK (USA)

GeoPump purge pumps are often added to the basic dedicated bladder pump system to increase the purging flow rate and decrease field time. Purge pumps offer flow rates up to 3.5 times higher than a conventional bladder pump alone which significantly reduces field costs over the life of a monitoring program.

Well Development Swabs

by GeoPump, Inc.     based in Medina, NEW YORK (USA)

GeoPump Well Development Swabs offer a simple, effective and convenient way to accomplish this important task. Development swabs are typically used in conjunction with GeoPump gas-drive pumps simply by attaching the swab assembly to the threaded intake of the pump. This effectively increases the diameter of the pump to enable the user to produce ...

Well Closures

by GeoPump, Inc.     based in Medina, NEW YORK (USA)

GEOPUMP Well Closures provide a means of terminating dedicated tubing to the well head, supporting the pump, and housing the air and liquid discharge fittings. The standard closure is a non-lockable flat cap, recommended where recovery wells are underground vaults or protective closures.

Weston - In Situ Recirculating Well Technology

by Weston Solutions, Inc     based in West Chester, PENNSYLVANIA (USA)

Recirculating Well Technology is an in situ system for remediating contaminated aquifers. This technology is based on a very simple concept and design where downhole equipment creates movement of groundwater into and back out of the well after treatment. This movement develops a groundwater circulation cell around a remediation well. The ...

Well-Water Softeners

by Kinetico Incorporated     based in Newbury, OHIO (USA)

Well water brings with it a host of unwanted substances, such as iron and manganese, which are effortlessly removed with a Kinetico well-water softener.

Locking Well Caps

by Waterra USA Inc.     based in Bellingham, WASHINGTON (USA)

Waterra stocks two different types of locking environmental wells caps. Both of these devices have a number of unique features that customers find useful and convenient. The EcoPlug™ offers affordability with a more conventional design, but includes the largest sealing gasket of any plug available. The Enviro Cap™ is unique with ...

Drive-Point Piezometers - Model 615 - Direct Push Well Points

by Solinst Canada Ltd.     based in Georgetown, ONTARIO (CANADA)

Solinst Drive-Point Piezometers make ideal permanent or temporary, inexpensive wells to monitor groundwater, soil and gas. While costs are kept low, sample integrity is maintained. The piezometer tip and screen are stainless steel to obtain high quality samples, and a barbed fitting allows a sample tube to be attached. Easily install using a ...

Penney - Soil Vapor Extraction (SVE)

by Penney Engineering, Inc     based in Mansfield, MASSACHUSETTS (USA)

Soil Vapor Extraction (SVE) is a proven, economical remediation technology for volatile compounds with vapor pressures greater than 0.5 mm Hg from soils with intrinsic permeabilities greater than 10-8 cm2. Pilot studies are usually conducted to determine the ideal flow rate and zone of influence. Perforated pipe or well screen is installed ...

RIPE - Decommissioning Water Wells Packers

by Replacement Inflatable Packers & Elements Pty Ltd     based in Perth, AUSTRALIA

Decommissioning water well packers are used to plug or seal water well and boreholes. Deployed on wireline or drill rods with left hand back off thread or shear pin mechanism and inflated via a separate inflation tube which typically employs the use of check valves to prevent deflation.

Need help finding the right suppliers?

Let the XPRTs do the work for you