Training in Switzerland

2096 Results found
  • Location: Europe ×

  • Location: Switzerland ×

Webinar - Optimize Separations in Dark Crude Oil

by Mettler - Toledo Int. Inc

This webinar focuses on how to optimize flow assurance, separations, fouling, and tailings management to reduce exploration and production costs in dark crude oil at standard operating temperatures and pressures, without sampling or sample dilution.

Webinar : Thermogravimetric Analysis (TGA)

by Mettler - Toledo Int. Inc

Thermogravimetric analysis (TGA) is widely used together with DSC, TMA, and DMA. TGA measures the mass of a sample while the sample is heated or cooled in a defined atmosphere. The main use of TGA is to characterize materials with regard to their composition.

Webinar : Avoiding Incidents at Scale-up: Is Your Process Resistant Towards Maloperation?

by Mettler - Toledo Int. Inc

This webinar discusses how to perform safe scale-up of chemical processes and includes a close examination of thermal risks and hazards.

Webinar : Continuous Flow Chemistry - Recent Advances in Organic Chemistry Part 7

by Mettler - Toledo Int. Inc

This webinar focuses on how to monitor continuous flow chemistry reactions. Ways to develop a continuous flow chemistry process are discussed.

Webinar : High-pressure DSC

by Mettler - Toledo Int. Inc

Increased pressure influences all physical changes and chemical reactions in which a change in volume occurs. For material testing, process development, and quality control there is often no alternative to DSC measurements under pressure. High-pressure DSC allows you to measure samples under defined atmospheres at up to 10 MPa as a function of ...

Webinar : Specific Heat Capacity Determination

by Mettler - Toledo Int. Inc

The specific heat capacity (cp) is an important, temperature-dependent material property and is often specified in material data sheets. It can be conveniently and reliably measured by DSC. The specific heat capacity is a key property for improving technical processes such as injection molding, spray drying or crystallization as well as for the ...

Webinar : In Situ Flow Technology to Continuous Processing - Part II

by Mettler - Toledo Int. Inc

For continuous flow chemistry processing, FlowIR is a convenient inline analytical tool. The FTIR instrument for real-time monitoring of continuous flow chemistry is easily incorporated into a variety of flow set-ups and is shown to meet some of the new challenges that flow chemistry presents to the synthetic chemist.

Thermomechanical Analysis (TMA)

by Mettler - Toledo Int. Inc

Thermomechanical analysis (TMA) is used to measure the dimensional changes of a material as a function of temperature. It is one of the most important thermal analysis techniques, complementary to the well-established DSC, TGA and DMA techniques. TMA allows you to determine expansion coefficients and softening temperatures. It can measure ...

Webinar : TGA-Sorption

by Mettler - Toledo Int. Inc

Measurements under conditions of controlled relative humidity provide information that is crucial for understanding the effects that moisture content can have on the properties of a wide range of materials. TGA-Sorption analysis gives answers regarding.

Webinar : Thermal Optical Methods

by Mettler - Toledo Int. Inc

This Webinar covers three optical methods that are used in combination with DSC: DSC-Microscopy, DSC-Chemiluminescence, DSC-Photocalorimetry. These exciting techniques will be explained in detail. Numerous application examples will be given to illustrate the benefits of the three optical techniques. METTLER TOLEDO offers for each technique a ...

Need help finding the right suppliers?

Let the XPRTs do the work for you