Briquetting Systems Equipment in Gambia

166 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Briquetting Systems ×

  • Location: Africa ×

  • Location: Gambia ×

RUF - Wood and Biomass Briquetting Machines for Organic Material

by Ruf Maschinenbau GmbH & Co. KG

The perfect machine for each organic material: Our presses can process different wood residues as well as biomass maintaining the same quality and density – from fine dust and shavings to rough wood chips. In addition, other organic substances such as miscanthus, straw and cotton can be compressed to handy briquettes of various shapes, taken ...

KAHL - Wood Pelleting Plants

by Amandus Kahl GmbH & Co. KG

KAHL WOOD PELLETING - A high quality awareness establishes KAHL on the wood pellet market. For more than 30 years Kahl has dealt with this product and can offer a sophisticated process for the production of high-quality pellets with very good combustibility, now.

Steel Plant Residues Recovery

by econ industries GmbH

Process and design: The increasing demand to reuse residues from steel plants leads to sophisticated solidification and granulation processes as well as the production of highly viscous suspensions. Materials from very different origins need to be homogenised by turbulent mixing processes to ensure the required consistency for the approptiate ...

Scrap Metal Shredder

by Granutech-Saturn Systems

Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and ...

Specac - Atlas Series - Evacuable Pellet Dies

by Specac Limited

Specac manufactures a wide range of high-quality Atlas Series Evacuable Pellet Dies suitable compacting powdered samples into discs or briquettes. These are particularly well suited for the preparation of solid KBr pellets for FTIR molecular spectroscopic analysis and XRF pellets for X-Ray Fluorescence atomic spectroscopic analysis (as required by ...

Metso EtaCrush - ZB - Turnings Crusher

by Metso‘s Recycling Equipment and Services

The turnings crushers of the Metso EtaCrush series use highly wear-resistant, freely suspended crushing tools instead of rigid blades that become blunt over time. Due to the high rotor speed, the turnings are crushed and discharged through the grid openings at the bottom of the unit. Changing the grid openings allows production of specific chip ...

Metso EtaAnodeCrush - Anode Crusher

by Metso‘s Recycling Equipment and Services

Hydraulically operated the anode crusher is designed for the effective crushing of anode butts from the aluminum electrolysis, or for whole baked or green waste anodes for re-use of the material in the anode coal mills. With the Metso EtaAnodeCrush wear and tear of crushing tools and crusher zone lining are cut down to the barest minimum, as ...

RUF - RSP - Dust Press

by Ruf Maschinenbau GmbH & Co. KG

For different filter dusts and for a low to middle throughput rate. Example: aluminum dust. With this RUF dust press it is possible to press dusts like aluminium, copper, tin, zinc, steel etc... as well as material from laser machining with a throughput rate of between 15 and 50 kgs/h depending on the material. Because of the small size the press ...

RUF - RAP - Annex-Press

by Ruf Maschinenbau GmbH & Co. KG

For low throughput rates. With this little press without precharger throughput rates of between 20 and 40 kgs/h are possible. Due to its high pressure different materials can be processed. Feeding and disposal peripherals are optional. The size of the briquette is 60 x 40 mm (edges smoothed off). The height is between approx. 20 and 60 mm.

RUF - Metal Sludge Press - RB 2,2 up to RB 4

by Ruf Maschinenbau GmbH & Co. KG

With different pressures, for low to middle throughput rates. With this RUF metal sludge press with or without a precharger are throughput rates of up to 70 kgs/h realizeable. The coolant pressed out gets with a diaphragm pump back to the machine or to the central KSS-materials preparation plant. Because of the low size the press can be fixed ...

Need help finding the right suppliers?

Let the XPRTs do the work for you