Briquetting Systems Equipment in São Tomé & Príncipe

37 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Briquetting Systems ×

  • Location: Africa ×

  • Location: São Tomé & Príncipe ×

PET Bottles ( Emptied and Full )

by Strautmann Umwelttechnik GmbH

Since the introduction of PET bottles in 1990 by the Coca Cola Company, Strautmann deals with the compression of this valuable material. With our product range in Briquetting Presses ( known today as BrikPress ) we have developed into the market leader. For small amounts of PET bottles our wide programme in baling presses offers a good ...

Model TH 514/520 - Briquette Press

by WEIMA Maschinenbau GmbH

The TH Standard series is designed for processors requiring throughput rates of more than 80 kg per hour or more than 200 kg per day. Highly compact briquettes are possible with this sturdy press housing with materials such as; wood, polystyrene, foam, light alloy, paper or biomass. Numerous options available to include; oil cooling allowing ...

Model HD 500 - Briquette Press

by WEIMA Maschinenbau GmbH

Briquette presses of the HD (High Density)-Series are specifically designed for compacting problematic materials such as MDF-dust wood chips and metal swarf. An extremely high pressure is generated in a closed chamber which leads to briquettes with a high density – without any additives. Not only circular briquettes with a diameter of 50 mm ...

Model DH500-28 x 2 - Briquetting & Compacting Roll Press

by K.R. Komarek Inc

Designed specifically for briquetting coal and charcoal at high production rates. Products such as these typically require a binder. Our dual gravity feeder design incorporated into this model is ideal for this type of application. Throughput Range30-60 tons/hr.

C. F. Nielsen - Briquette Breaker

by C. F. Nielsen A/S

The CFN briquette breaker is a more economical and faster alternative to our BS 350 automatic briquette saw. The CFN briquette breaker is an ideal solution for rough breaking briquettes in similar length before packing in shrink film or cardboard boxes. The length of the briquettes can be adjusted from 200-350 mm and will vary +/- 10-15 mm in ...

C. F. Nielsen - Model BP 5500 BBCS - Mechanical Briquetting Press

by C. F. Nielsen A/S

BP 5500 is a sturdy and reliable mechanical briquetting press designed for companies with large demand for automatic or semi-automatic production of industrial or consumer briquettes. The press is therefore often connected to a large silo with automatic discharge system, for unmanned operation. The standard BP5500 has the functional BBCS, Basic ...

C. F. Nielsen - Model BP 6000 HD BBCS - Mechanical Briquetting Press

by C. F. Nielsen A/S

BP 6000 is a sturdy and reliable mechanical briquetting press designed for companies with large demand for automatic or semi-automatic production of mainly industrial briquettes from woodwaste or agriwaste. The press is often connected to a large silo with automatic discharge system for unmanned operation. The standard BP6000 has the functional ...


PRAB Dualpak - Chip Briquetter

by PRAB, Inc

PRAB's Dualpak briquetter by Neff Press increases the value of your metal chips, turnings and swarf by compressing it into solid briquettes. Augers feed chips into a compression chamber. Then two opposing hydraulic cylinders press the metal, squeezing out the cutting fluid or coolant and creating a compact, up to 99 percent dry, briquette.

Dust Briquetter

by Balemaster

The Balemaster Dust Briquetter Baler creates a rock hard 60 to 70 pound per cubic foot puck using high compression forces. The streamline design, 16' long feed hopper and low profile feed chute height allow for a good fit under standard bag-house filter systems. The energy efficient hydraulic power packs – from 7.5 to 10 horsepower – ...

Model TH Vario Plus - Briquette Press

by WEIMA Maschinenbau GmbH

The modular design of the TH Vario plus series allows exact adaptation to suit your existing premises or production conditions. Briquettes can be made from materials such as wood, polystyrene, foam, light alloy, paper or biomass – with throughput rates and briquette quality to meet high industrial demands (precondition: material residual ...

Need help finding the right suppliers?

Let the XPRTs do the work for you