Briquetting Systems Equipment in Virginia

Served | Office inNear
90 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Briquetting Systems ×

  • Location: USA ×

  • Location: Virginia ×

Dust Briquetter

by Balemaster     based in Crown Point, INDIANA (USA)

The Balemaster Dust Briquetter Baler creates a rock hard 60 to 70 pound per cubic foot puck using high compression forces. The streamline design, 16' long feed hopper and low profile feed chute height allow for a good fit under standard bag-house filter systems. The energy efficient hydraulic power packs – from 7.5 to 10 horsepower – ...

Model DH500-28 x 2 - Briquetting & Compacting Roll Press

by K.R. Komarek Inc     based in Wood Dale,, ILLINOIS (USA)

Designed specifically for briquetting coal and charcoal at high production rates. Products such as these typically require a binder. Our dual gravity feeder design incorporated into this model is ideal for this type of application. Throughput Range30-60 tons/hr.

PRAB Dualpak - Chip Briquetter

by PRAB, Inc     based in Kalamazoo, MICHIGAN (USA)

PRAB's Dualpak briquetter by Neff Press increases the value of your metal chips, turnings and swarf by compressing it into solid briquettes. Augers feed chips into a compression chamber. Then two opposing hydraulic cylinders press the metal, squeezing out the cutting fluid or coolant and creating a compact, up to 99 percent dry, briquette.

Model MS Series - Roll Briquetters

by Bepex International LLC     based in Minneapolis, MINNESOTA (USA)

Along with standard industrial grade equipment, Bepex International can offer equipment, like our Roll Briquetters, specifically suited to your individual process requirements. Bepex International specializes in the tough applications, especially when product quality and cleanliness are concerns. All Bepex International briquetters are ...

Model TH Vario Plus - Briquette Press

by WEIMA Maschinenbau GmbH     based in Ilsfeld, GERMANY

The modular design of the TH Vario plus series allows exact adaptation to suit your existing premises or production conditions. Briquettes can be made from materials such as wood, polystyrene, foam, light alloy, paper or biomass – with throughput rates and briquette quality to meet high industrial demands (precondition: material residual ...

Model TH 514/520 - Briquette Press

by WEIMA Maschinenbau GmbH     based in Ilsfeld, GERMANY

The TH Standard series is designed for processors requiring throughput rates of more than 80 kg per hour or more than 200 kg per day. Highly compact briquettes are possible with this sturdy press housing with materials such as; wood, polystyrene, foam, light alloy, paper or biomass. Numerous options available to include; oil cooling allowing ...

Model TH 1500 - Briquette Press

by WEIMA Maschinenbau GmbH     based in Ilsfeld, GERMANY

The briquetting press TH 1500 presses all  compressible materials in an especially hardened form. The briquette formed in this way is very dense in shape and is ejected in turns. The axial piston pump of the hydraulic system is driven by an energy-efficient 30 kW motor. The throughput rate is determined by the specific weight of the material, ...

Model HD 500 - Briquette Press

by WEIMA Maschinenbau GmbH     based in Ilsfeld, GERMANY

Briquette presses of the HD (High Density)-Series are specifically designed for compacting problematic materials such as MDF-dust wood chips and metal swarf. An extremely high pressure is generated in a closed chamber which leads to briquettes with a high density – without any additives. Not only circular briquettes with a diameter of 50 mm ...

C. F. Nielsen - Model BPU 2500 to 6500 - Briquetting Press Units

by C. F. Nielsen A/S     based in Baelum, DENMARK

C.F. Nielsen is offering a range of Briquetting Press Units, including a mechanical briquette press with small buffer silo, dosing screw and touch screen control panel.

C. F. Nielsen - Briquette Breaker

by C. F. Nielsen A/S     based in Baelum, DENMARK

The CFN briquette breaker is a more economical and faster alternative to our BS 350 automatic briquette saw. The CFN briquette breaker is an ideal solution for rough breaking briquettes in similar length before packing in shrink film or cardboard boxes. The length of the briquettes can be adjusted from 200-350 mm and will vary +/- 10-15 mm in ...

Need help finding the right suppliers?

Let the XPRTs do the work for you