Chipping Equipment Equipment in Nova Scotia

335 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Chipping Equipment ×

  • Location: Canada ×

  • Location: Nova Scotia ×

MSA Cairns - 360 - Structural and Rescue Fire Helmet

by Argus-Hazco

The multi-incident Cairns 360 Structural modern fire helmet is one of the lightest structural helmets offered by Cairns. With its low profile, it is small enough for EMS and confined space.

LIN-KA - 60 - 1,500kW - Woodchips Hot Water Plant

by LIN-KA MASKINFABRIK A/S

A woodchip plant consists of a scraper unit which is logically located in the immediate vicinity of the woodchip plant. 3 horizontal scrapers are positioned in the magazine which feed fuel to a countersunk lateral worm drive at the end of the scraper system. The worm drive is monitored by a photocell and when the drive is full, the hydraulic ...

UIG - Glass Fused Bolted Tanks

by United Industries Group, Inc.

United Industries Group Inc. (UIG) offers glass fused to steel bolted storage tanks and silos for use in applications where bare metal or epoxy coating is not recommended. These tanks are commonly called “glass lined” or “glass fused-to-steel” and are coated inside and out with a glass enamel that binds to the metal and ...

Tana - BioChipper - Smartest Mobile Drum Chipper

by Tana Oy

Tana BioChipper is the smartest mobile drum chipper on the market. It has been developed together with contractors handling soft and hard wood as well as with sawmill owners who need to chip left over materials. As a result, TANA BioChipper is customer oriented and has all necessary features for effective chipping and intelligent management ...

Vermeer - HG6000TX - Horizontal Grinder

by Vermeer

Process wood waste more efficiently with the HG6000TX horizontal grinder. Self-propels into the most remote jobsites on 20”/51 cm or 24”/61 cm double grouser track pads. High ground clearance and sealed rollers help keep material from building up in the track system. State-of-the-art wireless remote lets you operate the machine from up ...

Vermeer - BC1000XL - Brush Chipper

by Vermeer

Vermeer continues its dedication to delivering highly innovative, fuel-efficient equipment with the BC1000XL brush chipper. Complete with an 89-horsepower (66.4 kW) GM 3.0L gas engine, the chipper is powered by a dependable electronic fuel injection (EFI) system. The BC1000XL also features a direct electronic pressure regulator that allows for ...

Vermeer - BC1500 - Tier 3 Brush Chipper

by Vermeer

Powered by a 125 hp/93 kW John Deere tier 3 diesel engine, the BC1500 powers through material up to 15”/38 cm in diameter. Automatic throttle and clutch system prevent high-throttle clutch engagement to reduce frequent clutch plate adjustments. Extra-large 45-gallon/170 L fuel tank lets you put in more hours before refueling. The optional ...

Vermeer - BC1800XL - Tier 4i (Stage IIIB) Brush Chipper

by Vermeer

Tackle wood waste measuring up to 19” (48.3 cm) with the powerful BC1800XL brush chipper. Three Tier 4i (Stage IIIB) engine options ranging from 115 hp (85.8 kW) to 173 hp (129 kW) allows you to select your ideal level of power. Patented SmartFeed control system monitors engine performance, and then either reverses or stops the vertical feed ...

TYRANNOSAURUS - Type LPE - Circular Screw Reclaimers

by BMH Technology Oy - Home of the Tyrannosaurus

TYRANNOSAURUS self-supporting circular screw reclaimer type LPE has been developed for discharging material both from silo and round open-air storages.

TYRANNOSAURUS - Type LPD & LPA - Traversing Screw Reclaimers

by BMH Technology Oy - Home of the Tyrannosaurus

Traversing screw reclaimer type LPD is designed for reclaiming material from rectangular storage silos, A-frame storage buildings, open-air piles and receiving bins. Type LPA is designed for larger storage systems where a more extensive reclaim area is required. This type of a reclaimer is provided with a supporting rail and drive arrangements in ...

Need help finding the right suppliers?

Let the XPRTs do the work for you