Chipping Equipment Equipment in Lithuania

576 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Chipping Equipment ×

  • Location: Europe ×

  • Location: Lithuania ×


LandEnergy - Wood Pellets

by LandEnergy Limited

We manufacture low carbon, premium quality wood pellets in our own production plant in Girvan, Scotland from virgin feedstock sourced from UK sustainable forests.

BDS - Belt Drying System for Biomass

by ANDRITZ Separation - a division of the Andritz Group

Biomass drying - necessary pretreatment for further processes. ANDRITZ supplies the complete process, not only for sludge treatment, but also for biomass drying - from wet milling to drying, fine milling and pelleting, all from a single source.

LIN-KA - 60 - 1,500kW - Woodchips Hot Water Plant

by LIN-KA MASKINFABRIK A/S

A woodchip plant consists of a scraper unit which is logically located in the immediate vicinity of the woodchip plant. 3 horizontal scrapers are positioned in the magazine which feed fuel to a countersunk lateral worm drive at the end of the scraper system. The worm drive is monitored by a photocell and when the drive is full, the hydraulic ...

Vermeer - BC900XL - Brush Chipper

by Vermeer

The new Vermeer BC900XL brush chipper was designed to eliminate the guesswork out of chipping. No chucking. No ducking. Just smooth chipping performance. Able to chip heavily branched material up to 9” (23 cm) in diameter and 14” (35.5 cm) wide, the BC900XL is ideal for line clearing and general clean-up needs. In combination, the ...

UIG - Glass Fused Bolted Tanks

by United Industries Group, Inc.

United Industries Group Inc. (UIG) offers glass fused to steel bolted storage tanks and silos for use in applications where bare metal or epoxy coating is not recommended. These tanks are commonly called “glass lined” or “glass fused-to-steel” and are coated inside and out with a glass enamel that binds to the metal and ...

Tana - BioChipper - Smartest Mobile Drum Chipper

by Tana Oy

Tana BioChipper is the smartest mobile drum chipper on the market. It has been developed together with contractors handling soft and hard wood as well as with sawmill owners who need to chip left over materials. As a result, TANA BioChipper is customer oriented and has all necessary features for effective chipping and intelligent management ...

LIN-KA - 400 - 3,000kW - Woodchips Mobile Plants

by LIN-KA MASKINFABRIK A/S

LIN-KA´s mobile plants are complete heat generation plants housed in a special container. The only component external to the main container is a fuel container with scraper system, the chimney and ash container. These are located on the outside and connected through holes in the container walls.

LIN-KA - 1,500 - 5,000kW - Woodchips Heating Plant

by LIN-KA MASKINFABRIK A/S

A woodchip heating plant can be built in many ways, depending on customer and operating requirements. LIN-KA has two main build types, which depend on such elements as boiler size and condition of fuel to be used etc.

Vermeer - HG6000TX - Horizontal Grinder

by Vermeer

Process wood waste more efficiently with the HG6000TX horizontal grinder. Self-propels into the most remote jobsites on 20”/51 cm or 24”/61 cm double grouser track pads. High ground clearance and sealed rollers help keep material from building up in the track system. State-of-the-art wireless remote lets you operate the machine from up ...

Vermeer - BC1000XL - Brush Chipper

by Vermeer

Vermeer continues its dedication to delivering highly innovative, fuel-efficient equipment with the BC1000XL brush chipper. Complete with an 89-horsepower (66.4 kW) GM 3.0L gas engine, the chipper is powered by a dependable electronic fuel injection (EFI) system. The BC1000XL also features a direct electronic pressure regulator that allows for ...

Need help finding the right suppliers?

Let the XPRTs do the work for you