transfer station compactors Equipment

30 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Compactors ×

  • Keyword: transfer station compactors ×

Transfer Stations

by Husmann Umwelt-Technik GmbH     based in Dörpen, GERMANY

Due to the waste disposal law and the implementing regulations, more and more small landfill sites are being closed with the result that waste has to be transported for long distances from where it originates to central landfill sites, incinerators and to composting and recycling plants. Due to the relatively low payload of the waste collecting ...

Powerkrush - Model 1000WTS - Transfer Stations

by Pakawaste Ltd     based in Preston, UNITED KINGDOM

The Powerkrush 1000 is our medium sized Transfer Station. It has a capability of handling 372 cubic metres per hour of general mixed waste with a swept volume of 5.18 cubic metres, making this powerful compactor a natural choice in the design of medium volume Refuse Transfer Stations. Massive sections are used throughout to ensure that no ...

SSI - Model 2500 - Transfer Station Compactors

by SSI Shredding Systems, Inc.     based in Wilsonville, OREGON (USA)

Bale Size: 7' x 7' x 13'. Bale Weight: 10 tons. Compaction Force: 200 tons. Total Cycle/Bale: 10-15 minutes. Horsepower: 100-200HP. Rate per hour: 35-55 tons/hr. Shipping Weight: 112,000-117,000 lbs.. Overall Length: 63' 5'. Control Panel: Auto or manual operation with Allen Bradley Panelview touch screen.

SSI - Model 4500 - Transfer Station Compactors

by SSI Shredding Systems, Inc.     based in Wilsonville, OREGON (USA)

Bale Size: 7' x 7' x 33'. Bale Weight: 25-30 tons. Compaction Force: 200 tons. Total Cycle/Bale: 15 minutes. Horsepower: 200HP. Rate per hour: 100 tons/hr. Shipping Weight: 165,000 lbs.. Overall Length: 87' 3 '. Control Panel: Auto or manual operation with Allen Bradley Panelview touch screen.

SSI - Model 4500-SPH - Transfer Station Compactors

by SSI Shredding Systems, Inc.     based in Wilsonville, OREGON (USA)

Bale Size: 7' x 7' x 34'. Bale Weight: 30-35 tons. Compaction Force: 260 tons. Total Cycle/Bale: 18 minutes. Horsepower: 250HP. Rate per hour: 100-120 tons/hr. Shipping Weight: 181,000 lbs. Overall Length: 88' 4'. Control Panel: Auto or manual operation with Allen Bradley Panelview touch screen.

SSI - Model 2500-SC - Scrap Metal Compactors

by SSI Shredding Systems, Inc.     based in Wilsonville, OREGON (USA)

Bale Size: 7' x 6' x 15'. Bale Weight: 10 tons. Compaction Force: 200 tons. Total Cycle/Bale: 20-25 minutes. Horsepower: 100HP. Rate per hour: 30 tons/hr. Shipping Weight: 118,500 lbs.. Overall Length: 66' 9 '. Control Panel: Auto or manual operation with Allen Bradley Panelview touch screen.

SSI - Model 2500-SPH - Transfer Station Compactors

by SSI Shredding Systems, Inc.     based in Wilsonville, OREGON (USA)

Bale Size: 7' x 7' x 17'. Bale Weight: 13-15 tons. Compaction Force: 200-260 tons. Total Cycle/Bale: 12-14 minutes. Horsepower: 200HP. Rate per hour: 65 tons/hr. Shipping Weight: 125,000-135,000 lbs.. Overall Length: 70' 6'. Control Panel: Auto or manual operation with Allen Bradley Panelview touch screen.

BlokPak 3000 Transfer Station Compactor

by Marathon Equipment     based in Vernon, ALABAMA (USA)

The BlokPak 3000 is Marathon's largest transfer system compactor. It compacts waste against a vertical gate forming a 10 ft. log in the compaction chamber. Each log is ejected into the transfer trailer. The BlokPak continues this process until maximum payload is achieved. When the trailer is full, the BlokPak can continue to be fed while changing ...

Thetford - Model T12/70 - Transfer Compactor

by Thetford International Ltd     based in Thetford, UNITED KINGDOM

The THETFORD T12/70 Power Plus compactor is for high volume waste and transfer station use. It is able to pack full width containers, compaction trailers, ejection trailers and ISO containers. The compactor can be stationed on or above ground level on supporting structure and has fully automatic hydraulic clamps to secure container interface. ...

Transfer Station & Soil Compaction

by Caron Compactor Company     based in Escalon, CALIFORNIA (USA)

Specialized wheels made to meet the demands of the transfer station environment. Designed to increase on-site material reduction and improved machine performance.

Need help finding the right suppliers?

Let the XPRTs do the work for you