Compactors Equipment in Michigan

505 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Compactors ×

  • Location: USA ×

  • Location: Michigan ×


OZONATOR - NG-3000 - Medical and Bio-Hazard Waste Treatment Technology

by OZONATOR Industries Limited

The OZONATOR is the complete solution to your bio-hazardous waste needs. With zero emissions, ease of operation, quick cycle time and low operating costs the OZONATOR is not only a better solution but also a more cost-effective solution. The functional part of this system is a combined process that loads un-segregated, bio-hazardous waste directly ...


RP 7700 M - Mobil-Jumbo Roll-Packer

by Bergmann, Heinz, e.Kfm.- Machines for Waste Management

The BERGMANN Mobil-Jumbo is the first mobile compaction device enabling the compaction of large quantities of bulky waste or re-usable material in several open containers and thus minimizing waste disposal journeys. The Mobil-Jumbo is the original, developed by BERGMANN, with highest reliability and quality and can be applied at as many open ...

Sebright - 4660 & 5260 - Industrial Stationary Compactor (2.5 Cubic Yard Capacity)

by Sebright Products, Inc.

The model 5260 stationary compactor is one of the industrial models, designed for tough waste streams such as small donation centers and thrift stores, recycle centers, and retail applications. Ideal for compacting items with spring back or memory such as corrugated cardboard. This size model is often set up with a 

Sebright - 5060 - Commercial Stationary Compactor (2.5 Cubic Yard Capacity)

by Sebright Products, Inc.

The Sebright model 5060 compactor is specially designed for high volumes of trash. Its high packing force and deep ram penetration into the container does a superior job of reducing bulky waste and trash to a fraction of its original volume. As with most of our models of compactors, the 5060 is available with a high volume (HV) motor which reduces ...

Sebright - SC-3548 - Mini Self-Contained Compactor (.75 Cubic Yard Chamber Capacity)

by Sebright Products, Inc.

This mini self-contained with a 15’ skid length and 14 cubic yard capacity was designed for applications where space is limited – a single, 4” bore cylinder offers 25,000 lbs of pressure to insure maximum loads in this little compactor. The clear top opening is 30” x 46” so bagged trash can easily be disposed of ...

Sebright - SC-3260 - Self Contained Compactor (1.3 Cubic Yard Capacity)

by Sebright Products, Inc.

This small self-contained Sebright model can be purchased in skid lengths from 16’ (16 Cubic yard capacity) to 24’ (32 Cubic yard capacity). Because the Model SC-3260 is designed to reduce in volume refuse that is wet, it is ideal for restaurants, supermarkets, and hospitals, as well as many other locations where trash that is ...

Sebright - 9884-T - Transfer Station Compactor (8 Cubic Yard Chamber Capacity)

by Sebright Products, Inc.

This mini transfer station compactor was designed to pack into semi-trailers for maximum loads and reduced transportation. The Sebright Model 9884T has a 50 HP motor and twin 6” cylinders for resulting maximum pressures of 101,772 lbs, and is engineered with extreme use in mind and will reduce downtime, lower maintenance, lower operating ...

Sebright - SC-4064 - Self Contained Compactor (2 Cubic Yard Capacity)

by Sebright Products, Inc.

Our newest self-contained model, the SC4060 is available in container capacities from 23 to 39 cubic yards, and has dual, crossed, 4” bore cylinders, resulting in 50,200 lbs of pressure. A great choice for higher volume, wet waste applications. A 1,200 gallon sump for excess liquids from the waste stream can be drained before the compactor ...

Sebright - Pre-Crusher - Stationary Compactors

by Sebright Products, Inc.

PreCrushers - Our Pre-Crusher is exclusively designed to be an integral part of the compactor. Not an add-on or after thought. Ideal for pallet, drum crushing and product destruction, and to achieve maximum density. Built to take the abuses of high compaction forces.

Sebright - 12084T6 & 12084T7 - Transfer Station Compactor (9 Cubic Yard Chamber Capacity)

by Sebright Products, Inc.

This transfer station compactor is available in both twin 6” cylinder with 121,583 lbs of pressure and twin 7” cylinder with 165,486 lbs. of pressure. Both models are engineered for high volume, low maintenance operation for many years.

Need help finding the right suppliers?

Let the XPRTs do the work for you