high pressure water jetting Equipment in Oregon

Serving Oregon | Office in OregonNear Oregon
119 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Industrial Cleaning ×

  • Keyword: high pressure water jetting ×

  • Location: USA ×

  • Location: Oregon ×

Vac-Con - Hot Shot High-Pressure Water Jet Machines

by Vac-Con, Inc.     based in Green Cove Springs, FLORIDA (USA)

Vac-Con’s Hot Shot high-pressure water jet machines are used for removing stones, bottles, cans, grease, sludge, and other debris from sanitary sewer and/or storm drain lines by the flushing action of high-pressure water. Hot Shot machines are equipped with a noncorroding, polyethylene water tank, with all controls for high-pressure water ...

Harben - Model Electric A-Frame 4010 EA - High-Pressure Water Jetting Unit

by Harben Inc.     based in Cumming, GEORGIA (US) (USA)

Harben Electric A-frame series high-pressure water jetting unit, incorporating a 10-gallon steel water header tank with float valve assembly, mounted on a 3 wheel cart to allow flexible placement of the unit. A 300 ft. capacity manual rewind hose reel will be fitted. Units are available with various pressures and flow to accommodate a variety of ...

JOY M&E - Model JME3E0-4000bar - High Pressure Water Jetting Unit

by China Joy Machinery and Equipment Limited     based in Tianjin, CHINA

JOY M&E pumps' product line includes the world's most dependable reciprocating triplex plunger pumps. This design allows a cost-effective pump to achieve high-efficiency and low-pulsation. JOY pumps field-proven dependability, efficiency, durability and versatility give users the best using experience.With highly-efficient pumps and proven ...

NLB - Model 1005 Series - High-Pressure Water Jetting System

by NLB Corp.     based in Wixom, MICHIGAN (USA)

The all-new 1005 Series diesel-powered units from NLB set a new standard for high horsepower units. With power and flexibility to spare, if your application can’t be tackled by one of these units, it can’t be tackled at all. Models are available ranging in horsepower from 750 to 1000 hp (560-746 kW) and with pressure from 4,000 to ...

NLB - Model 125 Series - High-Pressure Water Jetting Systems

by NLB Corp.     based in Wixom, MICHIGAN (USA)

This innovative line of high pressure water jetting units are designed around the model 125 convertible pump.  This pump, with its quick-change, in-line fluid end design, has fewer parts for increased operating efficiency and simpler maintenance. And, it requires only a simple conversion kit to operate at pressures between 6,000 and 40,000 ...

NLB - Model 325 Series - High-Pressure Water Jetting Systems

by NLB Corp.     based in Wixom, MICHIGAN (USA)

The 325 Series water blasting units are quintuplex versions of the 225 Series. What that means is that opposed to three plungers, these have five, allowing them to run at higher horsepower and produce higher flows. Because these units use the exact same fluid end components as the 225 Series, they are a perfect next step when higher horsepower is ...

NLB - Model 225 Series - High Pressure Water Jetting Systems

by NLB Corp.     based in Wixom, MICHIGAN (USA)

There are probably more NLB 225 Series water blasting units at work in the field today than any other single model, regardless of manufacturer.  With units ranging in horsepower from 200 to 300 hp (149-224 kW) and pressures from 4,000 to 40,000 psi (275-2,800 bar) its performance lands it squarely in the middle of a host of ...

NLB - Model 605 Series - High-Pressure Water Jetting System

by NLB Corp.     based in Wixom, MICHIGAN (USA)

What does one do with a pump that has 600 hp (447 kW) and pressures to 40,000 psi?  Why, whatever one wants.  The 605 Series diesel-powered units are the 800 pound gorillas of the water blasting world.  With power and flexibility to spare, if your application can’t be tackled by one of these units, it can’t be tackled at ...

NLB - Model 350 Series - High-Pressure Water Jetting Systems

by NLB Corp.     based in Wixom, MICHIGAN (USA)

The 350 Series water blasting units bring higher horsepower to users who want to stick with a triplex pump.  Models are available ranging in horsepower from 355 to 425 hp (261-317 kW) and with pressure from 8,000 to 20,000 psi (552-1,400 bar).

Dragflow - High Pressure Water Jet Ring System

by Dragflow S.r.l.     based in Villafranca, ITALY

High pressure water jet ring system can be used in presence of clay materials or with electric pumps, as an alternative or in addition to hydraulic cutters. This system consists of a ring, mounted on the pump filter and a centrifugal pump power of the same horizontal axis (available in electrical and hydraulic version). Jet ring is also available ...

Need help finding the right suppliers?

Let the XPRTs do the work for you