cross-flow shredder Equipment in San Marino

Serving San Marino | Near San Marino
37 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Industrial Shredders ×

  • Keyword: cross-flow shredder ×

  • Location: Europe ×

  • Location: San Marino ×

AUT - Cross Flow Shredder

by AUT Anlagen- und Umwelttechnologie GmbH     based in Chemnitz, GERMANY

The AUT Cross Flow Shredder enables the comminution/crushing of mixed waste and scrap down to different (depending on the smallest size the material can be physically broken down into) or defined grit sizes. No matter whether you prefer a coarse or fine grit size, by means of the intelligent discharge method you can choose the size the input ...

DIABOLO - Cross Flow Shredder

by AUT Anlagen- und Umwelttechnologie GmbH     based in Chemnitz, GERMANY

The DIABOLO Cross Flow Shredder combines two shredding methods in one machine which makes it an expert in the field of shredding and breaking up material compounds. Thanks to its two-step principle, even the toughest objects and composite materials, such as glass fibre reinforced plastics can be treated effectively, generating material particles ...

Super Shredder - High-Flow, Low Headloss Inline Disintegrator

by Franklin Miller Inc.     based in Livingston, NEW JERSEY (USA)

The Super Shredder in-line disintegrator reduces tough wastewater solids to fine bits with a unique, high flow, spherical rotor design. The unit is specifically designed for high capacity and minimal headloss. In fact, because of its high percentage of open area, the Super Shredder remains practically invisible to flow. The Super Shredder is ...

Super Shredder - High-Flow, Low Headloss Inline Disintegrator

by Franklin Miller Inc.     based in Livingston, NEW JERSEY (USA)

The Super Shredder in-line disintegrator reduces tough wastewater solids to fine bits with a unique, high flow, spherical rotor design. The unit is specifically designed for high capacity and minimal headloss. In fact, because of its high percentage of open area, the Super Shredder remains practically invisible to flow. The Super Shredder is ...

Allegheny - Model 16-75CX Cross-cut - High Capacity Shredders

by Allegheny Shredders     based in Delmont, PENNSYLVANIA (USA)

Single pass cross-cut shredding for highest level of destruction of your confidential information. igh level of destruction to meet more stringent security requirements. rings advanced cross-cut shredding capability into the office setting. uilt to be the most reliable in the industry, like all Allegheny conveyor-fed shredders.

Ameri-Shred - Model Series 3, 4 or 5 - Double Cut Shredding Systems

by Ameri-Shred Corp.     based in Alpena, MICHIGAN (USA)

A double cut system utilizes two strip cut shredders. The primary shredder's cutting assembly is specifically designed to optimize throughput while the secondary shredder provides the security of a smaller cut. These flexible systems can be created using series 3, 4 or 5 shredders.

Ameri-Shred - Model Series 1 - Cross Cut Industrial Paper Shredders

by Ameri-Shred Corp.     based in Alpena, MICHIGAN (USA)

AMS-300cc / AMS-500cc / AMS-750cc / AMS-1000cc 250 - 900 Lbs. Per Hour. Series 1 industrial paper shredders are available in 3 to 10 horsepower models.  They look identical but each successive model has more power, a larger drive and greater shredding capacity.  All components, including shafts, cutters and bearings, are sized for the ...

Ameri-Shred - Model Series 2 - Double Cut Hopper Fed Industrial Pre-Shredders

by Ameri-Shred Corp.     based in Alpena, MICHIGAN (USA)

AMS-PT Series Shredders. Pierce & Tear Shredders. Shown above with a Series 3 industrial paper shredder. Turn your existing strip cut shredder into a double cut shredding system without doubling your space or reducing your throughput. A forty horsepower AMS-4000 is shown above with a separate hopper fed pre-shredder that discharges onto its ...

Shredding Machine

by Wilki Engineering     based in Norfolk, UNITED KINGDOM

Our Wilki shredding machines have been used in the security shredding industry for many years providing our customers with reliable and safe document destruction. The shredders are available as a standard strip cut machine or as a shredding & chopping machine to give a cross cut for shorter strips. The shredders are available with various ...

Model ZDS / ZTS - Pre-Shredders

by Danieli     based in Buttrio, ITALY

Pre-shredders are generally installed upstream from a shredding system to prepare the material for entry into the shredder. Adding a pre-shredder to the metals process allows the operator to control the feed rate, leading to a more uniform flow of material through the shredder itself, and a higher density product. With their first-rate tooth ...

Related Terms for cross-flow shredder

Need help finding the right suppliers?

Let the XPRTs do the work for you