landfill covers Equipment in Bangladesh

Serving Bangladesh | Near Bangladesh
46 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Landfill ×

  • Keyword: landfill covers ×

  • Location: Asia & Middle East ×

  • Location: Bangladesh ×

tarpARMOR - Model TDS-30 - Automatic Tarping System

by tarpARMOR     based in Rogers, ARKANSAS (USA)

Frame: The frame is made of heavy-duty gauge steel and able to support at least (3) 30ft. wide by 100ft. long ballasted 6.5 oz. coated polypropylene tarps, with 5/16” chain sewn in pockets. Frame legs have shoes welded on to support the TDS-30 in soft or muddy ground conditions.

tarpARMOR - Model TDS-30 HC - Automatic Tarping System

by tarpARMOR     based in Rogers, ARKANSAS (USA)

The frame is made of heavy-duty gauge steel and able to support (4) 30ft. wide x 100ft. long ballasted 6.5 oz. coated polypropylene tarps, with 5/16” chain sewn in pockets. Frame legs are adjustable and have shoes welded on to support the TDS-30 HC in soft or muddy ground conditions.

WasteMaster - Compaction Management Systems

by AMW Machine Control     based in Reynoldsburg, OHIO (USA)

A construction and compaction management system for mobile field equipment and office management input for landfills.

FINN - Waste Cover

by FINN Corporation     based in Fairfield, OHIO (USA)

FINN Waste Cover is an Alternative Daily Cover (ADC) manufactured from recycled paper and wood and containing polymers, an enzyme complex, and other proprietary ingredients. When mixed with water in a FINN landfill spray application machine, the black spray on slurry is applied to the “open face” forming a cement-like crust. Waste ...

Macpresse - Model Mac 112 - Commercial and Municipal Solid Waste at In-Door Facilities and for Landfill Sites

by Macpresse Europa S.R.L     based in Vernate, ITALY

Capacity: 50/60 tons/hour. The MAC 112 baling press is the top-end model of the e Macpresse baler range. The exceptional solid static structure and the use of special bolted Hardox liners make it the ideal baler for higher volumes of MSW and commercial waste. With a thrust of 200 t, the MAC 112 produces high density bales for optimizes storage and ...

Model LF-120 - HydroSeeder

by FINN Corporation     based in Fairfield, OHIO (USA)

Designed specifically for use in the extreme environments of landfills, the LF-120 HydroSeeder®, an exclusive Finn Landfill Solution, is an efficient solution for applying alternative daily cover (ADC), as well as the application of materials to control odor, dust and erosion. Furthermore, the unit can be used as a mobile watering source to ...

LANDTEC - Model WBS-100 - Wellbore Seal

by LANDTEC     based in Colton, CALIFORNIA (USA)

Landfill well casing and wellbore can be a significant source of surface gas leaks and air intrusion. These potential problems frequently result from landfill settlement around well casings and cracking along the well bore. LANDTEC WBS-100 Wellbore Seal prevents gas leaks and air intrusion with an impermeable membrane that clamps onto a well ...

Model ACCU-FLO - Thermal Mass Flow Meter

by LANDTEC     based in Colton, CALIFORNIA (USA)

With an innovative edge the LANDTEC ACCU-FLO Meter highlights a distinctive feature: A Zero Calibration User Check and 5 year factory calibration interval. The User-Check allows the user to verify that their LANDTEC ACCU-FLO Meter has not shifted, drifted or deviated from its original NIST-traceable Factory Calibration value. This ability makes ...

Genap - Bottom and Cover Geomembranes for Landfill Sites

by Genap B.V.     based in `s-Heerenberg, NETHERLANDS

A bottom and cover geomembrane for landfill sites always involves a geomembrane that isolates the contamination in order to protect the environment or to specifically protect against potential future contamination. The seals have to be made under an installation certificate by a certified company. Genap has held this stringent KIWA certification ...

Intermediate Cover

by EPI Environmental Products - Enviro Cover System Division     based in Vancouver, BRITISH COLUMBIA (CANADA)

Intermediate Enviro Cover (IEC) is designed to cover areas which will not be in use for extensive periods of time before the next layer of waste is placed.An intermediate cover needs to be a durable barrier between the environment and landfill waste during these extended periods. The US EPA requires that when if using compacted earthen material, ...

Related Terms for landfill covers

Need help finding the right suppliers?

Let the XPRTs do the work for you