end of life vehicles Equipment

20 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Material Recycling ×

  • Keyword: end of life vehicles ×

ELV Car Dismantling Systems

by Al-jon Manufacturing, LLC

There are many configurations of Al-Jon’s End of Life Vehicle Recycling System or ELV. The ELV can be built with diesel or electric power, with a pedestal mount crane or a frame mounted crane, with the Impact V Car Crusher or the 580 Car Logger. In addition, the ELV can be operated inside a building or out in the open. How you configure your ...

High Volume Vehicle Drainage

by Crow Environmental Ltd

A quick and simple system for effective de-polluting of End of Life Vehicles(ELV). The Vehicle De-pollution Unit (VDU) provides a packaged solution for removing all the required fluids from an ELV and pumping them to a fluid storage facility. The unit integrates a 3T scissor lift to access the underside of the vehicle, although it can be used with ...

Macpresse - Model Mac 112 - Commercial and Municipal Solid Waste at In-Door Facilities and for Landfill Sites

by Macpresse Europa S.R.L

Capacity: 50/60 tons/hour. The MAC 112 baling press is the top-end model of the e Macpresse baler range. The exceptional solid static structure and the use of special bolted Hardox liners make it the ideal baler for higher volumes of MSW and commercial waste. With a thrust of 200 t, the MAC 112 produces high density bales for optimizes storage and ...

Macpresse - Model Mac 1500D - Private and Confidential Document Shredders

by Macpresse Europa S.R.L

For the disposal of private and confidential documents. The Macpresse document shredder is designed on the principle of the fast single rotor with rotating hammers coupled with screening grills or crates to vary the end partical size of the shredded material. The perfectly balanced rotor acts also as a flywheel and makes the hammer rotating action ...

Macpresse - Model Mac 111/1 - Continuous Baler for Larger Recycling Facilities

by Macpresse Europa S.R.L

Capacity: 30/60 tons/hour. The MAC 111/1 continuous baler sets the standard in terms of performance and speed of the compacting cycle. The production speed is exceptionally high with a low power/production ratio. The hydraulics include two variable-displacement & constant power pumps, allowing a capacity of up to 60 t/hour. This baler is ideal ...

Macpresse - Model Mac 110/1 - Horizontal Baler Recyclable Materials (High Density)

by Macpresse Europa S.R.L

Capacity: 25/50 tons/hour. The MAC 110/1 continuous press is characterized by the excellent ratio between power consumption and output for productions of up to 50 tons per hour. Among its main characteristics the big loading hopper and the thrust force of 170 tons. This baler produces high density bales for all grades of recyclable materials.

Macpresse - Waste Bale Wrapper

by Macpresse Europa S.R.L

Dense wrapped bales make storing 'IN the open possible. Balers resolve many of the problems connected with storing and moving waste from town centres to landfill sites.

Macpresse - Model Mac 111L/1 - Commercial; Industrial And Municipal Solid Waste Balers (High Capacity)

by Macpresse Europa S.R.L

Capacity: 55/60 tons/hour. A higher capacity baler suitable for MSW, commercial and industrial waste. The Macpresse dedicated range of ‘L’ series MSW balers are specifically designed, engineered and manufactured to process MSW in even the most challenging conditions, .i.e leachate, organics, vermin, high, corrosion, wear & tear.

Macpresse - Model Mac 111AS/1 - Automatic Baler for Large Bulky Materials Without Any Pre-Treatment

by Macpresse Europa S.R.L

Capacity: 40/65 tons/hour. The MAC 111AS/1 is specifically designed for the North American market. The oversized feeding hopper 83”x40” can bale large bulky materials without any pre-treatment reaching an hourly output of over 35 tons per hour with old corrugated containers (OCC).

Macpresse - Automatic System With Optical Readers

by Macpresse Europa S.R.L

Optical readers for deinking. Automatic system with optical readers for deinking printed paper. Like all our selection systems, the whole line can be customized on the basis of the customer's requirements.

Need help finding the right suppliers?

Let the XPRTs do the work for you