Medical Waste Equipment in Congo, Democratic Republic of the

164 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Medical Waste ×

  • Location: Africa ×

  • Location: Congo, Democratic Republic of the ×

AMB Ecosteryl - Model Serial 75 - Hospital Waste Treatment Systems

by AMB Ecosteryl     based in Mons, BELGIUM

• Capacity : up to 100 kg/hr (220 lbs/hr)• Volume capacity : approx. 1200 L• Length: 4.5m• Width : 4.5m• Height : 3m• Weight : 4.5 tons• Required floor space : 5 x 5.5m• Minimum ceiling height : 3.5m• Electric power consumption : 30 kWh• Electric power consumption per ton : 300-400 kWh/t• Shredder/Lifetime on Cutting Blades : 600-700 tons• ...

The Residents

by Dansk Skraldesug ApS     based in Odense, DENMARK

For the residents of the building there will be no change to the everyday handling of their refuse, but they will be without all the disadvantages that previously existed, such as odours, noise and vermin.

Sharp Containers

by Amcor     based in Hawthorn, AUSTRALIA

Sharpak range of containers for the safe disposal of contaminated sharps.

Newster - SWT Infectious Hospital Wastewater Sterilization System

by NEWSTER SRL - Medical waste sterilizers     based in Serravalle, SAN MARINO

The issue of hospital wastewater has been vastly underestimated because of the general belief that it can be treated as urban wastewater.Every hospital should be equipped with systems for wastewater treatment - or at least pretreatment - and disinfection to protect their facilities as well as the environment and  community health.This is even ...

Newster - Model 10 - Sterilization System

by NEWSTER SRL - Medical waste sterilizers     based in Serravalle, SAN MARINO

NEWSTER 10 sterilization system is a highly automated system, specifically designed to fit small to medium-sized healthcare facilities, allowing potentially infectious medical waste to be finely ground and sterilized, turning them into urban solid waste (CER 200301) or refuse-derived fuel (CER 191210). NEWSTER 10 waste sterilizer turns the medical ...

AMB Ecosteryl - Model Serial 75 Plus - On-site Hospital Waste Sterilization

by AMB Ecosteryl     based in Mons, BELGIUM

• Capacity : up to 100 kg/hr (220 lbs/hr)• Volume capacity : approx. 1200 L• Length: 5.5m• Width : 4.5m• Height : 5m• Weight : 4.5 tons• Required floor space : 6 x 6.5m• Minimum ceiling height : 5.2m• Electric power consumption : 32 kWh• Electric power consumption per ton : 320-427 kWh/t• Shredder/Lifetime on Cutting Blades : 600-700 tons• ...

BTS - Model MF40, 60, 75 - Balers

by Beckmann Technik & Service KG     based in Brakel, GERMANY

Features; The smallest baler in the BTS-range. Ideal for locations where space and height is restricted. Produces a very small compact bale. Suitable for small to middle volumes of waste. Suitable for garage forecourts, retail outlets. offices, small hospitality establishments, etc. CE-certified. Made in Europe.

Hospital waste treatment station

by Chongqing Gient Heating Industry Co., Ltd.     based in Chongqing, CHINA

Integrated Steam-based Medical Waste Treatment Equipment Station Model MWM40 -Suitable for centralized disposal of medical waste in hosipital, in-time an on-site treatment of scatted medical waste in rural areas.System Composition:Including autoclave system, steam boiler system, shredding system, loading unit etc.Advantages: I. Energy-saving ...

mobile bio-medical waste treatmnet system

by Chongqing Gient Heating Industry Co., Ltd.     based in Chongqing, CHINA

Mobile Type Steam-based Medical Waste Treatment Equipment Truck Model MWT90 -Suitable for in-time and on-site treatment of medical waste in emergency state, as well as the timely disposal in remote areas. System Composition:Including autoclave system, steam boiler system, shredding system, cleaning and disinfection unit;Semi-trailer and special ...

Gient - Medical Waste Treatment Station

by Chongqing Gient Heating Industry Co., Ltd.     based in Chongqing, CHINA

Features; Realize on-site and in-time treatment of medical waste. Reduce collection and transportation cost, avoid pollutions in transit. Operators no contact with medical waste. Medical waste loading – sterilization in autoclave – shredding – the final treated waste unloading, the whole process above is automatic operation, and ...

Need help finding the right suppliers?

Let the XPRTs do the work for you