Medical Waste Equipment in New Hampshire

Serving New Hampshire | Office in New HampshireNear New Hampshire
239 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Medical Waste ×

  • Location: USA ×

  • Location: New Hampshire ×

Germicidal UV Air Sterilization & Odor Control

by Light Sources, Inc.     based in Orange, CONNECTICUT (USA)

Maintaining clean, fresh air is essential to life. Industrial processes can cause pollutants, contaminants, and nuisance odors in the atmosphere and in the immediate environment. Germicidal UVC technology is an affordable and effective solution for both air sterilization and odor control.

AMB Ecosteryl - Model Serial 75 - Hospital Waste Treatment Systems

by AMB Ecosteryl     based in Mons, BELGIUM

• Capacity : up to 100 kg/hr (220 lbs/hr)• Volume capacity : approx. 1200 L• Length: 4.5m• Width : 4.5m• Height : 3m• Weight : 4.5 tons• Required floor space : 5 x 5.5m• Minimum ceiling height : 3.5m• Electric power consumption : 30 kWh• Electric power consumption per ton : 300-400 kWh/t• Shredder/Lifetime on Cutting Blades : 600-700 tons• ...

AMB Ecosteryl - Model Serial 125 - Medical Waste Treatment Systems

by AMB Ecosteryl     based in Mons, BELGIUM

• Capacity : up to 175 kg/hr (385 lbs/hr)• Volume capacity : approx. 2100 L• Length: 10m• Width : 3.5m• Height : 5.2m• Weight : 10 tons• Required floor space : 6 x 12m• Minimum ceiling height : 6m• Electric power consumption : 60 kWh• Electric power consumption per ton : 345-480 kWh/t• Shredder/Lifetime on Cutting Blades : 1200 tons• Electrical ...

AMB Ecosteryl - Model Serial 250 - Medical Waste Treatment Systems

by AMB Ecosteryl     based in Mons, BELGIUM

• Capacity : up to 300 kg/hr (660 lbs/hr)• Volume capacity : approx. 3600 L• Length: 12m• Width : 3.5m• Height : 5.2m• Weight : 12 tons• Required floor space : 6 x 15m• Minimum ceiling height : 6m• Electric power consumption : 80 kWh• Electric power consumption per ton : 345-480 kWh/t• Shredder/Lifetime on Cutting Blades : 1500 tons• Electrical ...

Sharp Containers

by Amcor     based in Hawthorn, AUSTRALIA

Sharpak range of containers for the safe disposal of contaminated sharps.

The Residents

by Dansk Skraldesug ApS     based in Odense, DENMARK

For the residents of the building there will be no change to the everyday handling of their refuse, but they will be without all the disadvantages that previously existed, such as odours, noise and vermin.

Sharps - Twelve 1-Quart TakeAway Recovery System

by Sharps Compliance, Inc.     based in Houston, TEXAS (USA)

Provides twelve 1-quart sharps containers and one pre-paid return shipping box for proper treatment. Sharps collection containers are designed for point-of-use collection of used healthcare materials, including sharps. When the single UPS return box is filled with all twelve 1-quart sharps containers, the system is packaged and shipped for proper ...

Sharps - 5-Quart Sharps Recovery System

by Sharps Compliance, Inc.     based in Houston, TEXAS (USA)

This sharps disposal by mail system includes a 5-quart Covidien SharpStar sharps container, shipping box, packaging, tracking manifest, instructions, pre-paid return postage, and proper treatment. The 5-Quart Sharps Recovery System is ideal for all medical professional offices seeking a cost-effective sharps disposal solution. Additionally, when ...

Medical Waste Disposal Systems

by The Mark-Costello Co.     based in Carson, CALIFORNIA (USA)

The Mark-Costello Co. Sterilizers use the basic principle of high temperature steam under pressure in an enclosed fully automatic steam retort. The sterilizer comes completely assembled and ready for simple final connections. All chamber vessels are built in accordance with requirements of the ASME Pressure Vessel Code. All Mark-Costello Co ...

Medical Waste Autoclaves

by The Mark-Costello Co.     based in Carson, CALIFORNIA (USA)

Regulated Medical Waste Processing Using High Pressure Steam. The autoclave as a device to sterilize medical equipment and supplies using high pressure steam was invented by Charles Chamberland about 1879. The Mark-Costello Co. has been building high pressure medical waste autoclave sterilizers for over 30 years. Safe and economical treatment, ...

Need help finding the right suppliers?

Let the XPRTs do the work for you